| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $29.37 | $28.77 | $27.87 | $26.67 | Contact US |
HAMGEEK R210 AD9363 SDR Development Board Zynq7020 512MB DDR3 for Openwifi Neptune ADI Pluto SDR
$293.28
HAMGEEK P210 AD9361 SDR Development Board Zynq7020 512MB DDR3 for Openwifi Neptune ADI Pluto SDR
$390.45
HamGeek Zynq7020 AD9361 K210 SDR Development Board 70MHz-6GHz 25MSPS 1GB DDR3 for Pluto SDR Openwifi
$545.72
10MHz OCXO Crystal Oscillator Constant Temperature Crystal Oscillator Module Frequency Reference
Description:
This module outputs the frequency accuracy of the 10MHz signal (+/-200ppb), has two signal outputs, and one is a standard 10MHz signal. The other is a 10MHz multiplier signal. The multiplier signal has 9 selection frequencies, which are 2X, 3X, 3.125X, 4X, 5X, 5.3125X, 6X, 6.25X, 8X.
The different multipliers are selected by the JP1 jumper pin. Correct the deviation of the 10Mhz output frequency (+/-2.0ppm) with the RV1 potentiometer.
More Details:
1. P1: Power input interface; (7~9V).
2. P2: 10MHz signal output interface; (10Mhz amplitude: 3Vpp) SMA interface
3. P3: N frequency output interface of 10MHz signal; (N*10Mhz amplitude: 5Vpp) SMA interface
4. RV1: Correct the deviation of the 10Mhz output frequency (+/-2.0ppm)
5. JP1 jumper needle selection:
S1=0, S0=0, OUT = 4X
S1=0, S0=M, OUT = 5.3125X
S1=0, S0=1, OUT = 5X
S1=M, S0=0, OUT = 6.25X
S1=M, S0=M, OUT = 2X
S1=M, S0=1, OUT = 3.125X
S1=1, S0=0, OUT = 6X
S1=1, S0=M, OUT = 3X
S1=1, S0=1, OUT = 8X
0 = connect directly to ground(L)
1 = connect directly to VDD(H)
M = leave unconnected(floating)
Package Included:
- 1 x OCXO Module
