10W 2.4G 4 Channels Wireless Transmitter Receiver A/V Audio Video Sender Receiver Combo 10000mw
Overview:
1. Select the working channel;
2. Usethe audio and video cable to connect the transmitter to audio and video signal;
3. Set up the antenna;
4. Plug the power adaptor into an electrical outlet to transmit its direct current to the
transmitter.
Features:
1. High working frequency and strong anti-interference capacity;
2. Employing a brand-new circuit and design,which ensures efficient receptio of clear
audio and video signals;
3. Providing a multiplicity of channels for users selection;interference between different
channels minimized;
4. Possessing application expandability,highly adaptable;
5. Full aluminum enclosure,providing enhanced radiation and anti-interference
capacity.
Specifications:
Model:WLK-0016
1. Working frequency bands:2331-2391MHz
2. Chanels available:4;
3. Transmit dual-track audio and visual signals;
4. Visual signal format:PAL/NTSC;
5. Audio input impedance:1KΩ;visual input impedance:75Ω
6. Power supply:DC 12V 4A
7. The actual enable distance:800-1500M (Wide transmiting range depending on the
environments)
8. T:175mmx80mmx45mm R:115mmx70mmx25mm
NOTE:
1. To avoid damage to the antenna,do not use excessive force to rotate the
antenna when adjusting its angle;
2. To avoid damage to the device,do not use power adaptors other than
those supplied by the manufacturer of this device;
3. One transmitter can work on one frequency only;the frequency select
switch of the transmitter can be pushed down to the next notch only.
Package:
1 X Receiver and transmitter;
2 X Power adaptors;
1 X Audio and video cables;
1 X Users instructions.