Tags: Power Inverter
| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $156.97 | $153.76 | $148.96 | $142.55 | Contact US |
Feature:
- Pure sine wave inverter
- AC Direct Connect Terminal!
- Fault work LED indicator for.
- AC receptacle that can be used with any separate spliter to provide even more outlets.
- On/off switch.
- Over Temperature protection inverer
- Over Load protection.
- Intelligent cooling.
- Internally fuse protected.
- AC output short circuit protection.
- Auto reset on most fault conditions.
- Inverter manual.
- Intelligent IC control
- Multiple protection function
- Buzzer alarm to remind
- Work instruction function
- Double-sided PCB/import zero device
- Aluminum alloy shell
Parameter:
- Application:off-grid Solar system
- Power:1000W
- Rated Voltage:12V/24/48V,optional.
- Cooling Mode:with over-temperature the fun will work
- Certification:CE ROHS
- Output voltage:100/110/120/220/230/240V AC
- Instantaneous power:2000W
- Output waveform: Pure Sine Wave
- Output frequency:50Hz/60Hz
- Output voltage error:low & high 10%
- No-load loss:<10W
- Efficiency:>90%
- USB output voltage(external):5V
- LED display:display working mode & fault status
- Size:305x146X66mm
Connection Steps:
(1)Check if all the components are all included.Such as,enclose bags and use manual.At the same time inspect whether battery voltage is accordance with the rated input voltage.
Enough current should be offered from the input battery voltage. Details calculate is that the output power/input voltage/0.85=output current
For example: load of 1000w,the output voltage is 12v,so the input current =1000/12/0.85=98 (Ampere).
Appropriate connection wires should be chosen according to the current rule that within 1 meter 8A/mm.12mm connect wires should be regarded as the 1000w inverter with input voltage 12v.Others must also match with each other.
2)The GND wire of inverter should be connected to ground firstly before using. Do not regarded zero wire as the ground connect line.
3)Close the power of inverter,ie,press down the button "OFF"
4)Confirm the positive and negative polarity of battery,high voltage is the positive and low one is negative
5)Pull out the inverter input terminal,red means positive polarity (+) and black refers to negative polarity (-).
6)Choosing the suitable black area line according to the first step and then connect to black wire of inverter input terminal and pull tight at last.
7)Choosing the suitable red area line according to the first step and then connect to red wire of inverter input terminal and pull tight at last.
8)Connect the black wire on the other side of the battery negative pole and ensure connection is firm.
9)Connect the red wire on the other side of the battery positive pole and make sure connection is firm.
10)Check and make sure all the connection are in right order and then the inverter power,just press the button "ON" is ok.
11)Inverter will get stable alternate current within 5 seconds after green led of inverter turn on.
12)The power of electronic equipment which connected to the AC socket of inverter shouldn't be exceed rated power of inverter.
13)Press the button "ON" and then the power switch of load will be opened.
