Tags: RF Amplifier
| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $20.46 | $20.04 | $19.42 | $18.58 | Contact US |
DIY Portable Aluminum Alloy Vehicle Shortwave Antenna Base + Tripod Adapter for Outdoor Installation
$37.54
DIY Portable Aluminum Alloy Vehicle Shortwave Antenna Base with M-female Interface for Outdoor Installation
$34.62
Quansheng UVK5/UVK6 Full-SI4732 Chip and Crystal Oscillator Modification Module FPC HF Shortwave Full-band/SSB Receiving
$17.05
Application:
- Broadband RF power amplifier for all types of wireless applications,FM shortwave radios remote control toys,digital radio, etc.
- Enter 1 milliwatt (0DBM) maximum output of 3 watts,15V voltage supply,broadband work 1MHZ to 700MHZ can be work.
- As a result of well-designed, low end that can reach 35DBM (3W),at 500M,the output power can reach 32DBM(1.6W),please refer to the specific parameters S21 and point frequency test chart.
- Amplifier size 37MMx56CMx1.5CM (behind with a large heat sink).
Technical indicators:
1. supply voltage: + 15V DC (typical current 450mA/gain maximum output)
2. the operating frequency: 1MHZ-700MHZ,input and output impedance: 50 ohms
3. the maximum output amplitude: 35dbm (3.2W/50 Ohm)
4. Gain: 35 dB (see specific curves S21 curves,different frequencies are different)
5. the input signal Size: low frequency (0DBM/1 mW),high frequency (2DBM)
Note: Do not power it when there is no signal input or output is not connected to load.
Package List:
- 1 x 1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier for Ham Radio
