2.4G 6CH IDEAL FLY Apollo FPV Quadcopter RTF Aircraft w/ Flight Controller Receiver&Gimbal ALL In One

2.4G 6CH IDEAL FLY Apollo FPV Quadcopter RTF Aircraft w/ Flight Controller Receiver&Gimbal ALL In One

Features:
- Engineering plastic and titanium alloy filled in the case
- Absolutely ready to fly after putting the battery in without installation and test
- IFLYV4M specified control system and GPS module integrated in the quadcopter to make sure stable and safe flight
- Users can change the modes among balance, height and GPS easily
- Built-in lose control protection to make the quadcopter return back and land off automatically.
- Specific low noise power system completely helps to eliminate the screaming noise from the flyers
- LED lights mounted on each motor arm to provide good flying direction
- Pre-installation position makes the Gimbal conveniently mount on the bottom and also easily adjust the motions: moving up and down, rolling left and right

Parameter for Quadcopter:
- Power Consumption (Flight Control Board):  3.12W
- Flight Weight:  <1200g
- Hovering Precision (GPS Mode):  ±0.8m (Vertical), ±2.5m (Horizontal)
- Max. Speed of Tail Servo Horn:  300 deg
- MAX. Tilt Angle:  45 Degree
- Max. Vertical Speed: ±4m/s
- Max. Flying Speed: 5m/s
- Axle Base: 350mm
- Working Temperature: -10 to -50 Celsius Degree

Parameter for Radio Control:
- Frequency: 2.4GHz ISM
- Channel for Receiver: 6CH
- Control Distance: 300 meters (outside or without obstruct)
- Receiving Sensitivity (1%PER): >-93dBm
- Transmitter Power: <20dBm
- Working Capacity: 52Ma@6V
- Without battery

Parameter for Charger:
- Input Voltage: 100-240V
- Charging Current: 1A/2A
- Balance Current: 200Ma
- Power: 20W

Apollo RTF(A1) Version:
- 1*Apollo aircraft
- 1*6 channel remote controller+Receiver
- 1* landing skid
- 1 x 2 axis gimbal (for Gopro and Boscam camera)
- 1 x battery Charger

Test Video: