2 Stroke 3.5HP Heavy Duty Outboard Motor Boat Engine w/Water Cooling System

2 Stroke 3.5HP Heavy Duty Outboard Motor Boat Engine w/Water Cooling System

Product Details:
- Overall length: 92CM
- Overall width: 36.5cm
- Overall height: 22cm
- Transom height: 42cm
- Full throttle operating range: 4000-5000r/min
- Maximum output: 2.5kw (3.5HP)
- Speed: 20km/h(four people)
- Type: 2-stroke
- Ignition system: CDI system
- Starting system: Manual start
- Staring carburetion system: Choke start
- Propeller mark: 7-1/45-A (inch)
- The engine and the propeller ratio: 2:1
- Recommended fuel: Regular unleaded gasoline
- Fuel to oil ratio: 30:1
- Gear ratio: 27/13
- Maximum speed: 10 km / h
- Built-in fuel tank: 1.3L
- Fuel consumption per hour: 1.5L

Announcements:
After in the sea water or turbid water cruising
1. Use the fresh water cleaning the outboard motor
2. With the moderate velocity circulating the engine, cool off the water chanel with fresh water.
3. Before completely running out cooling water, don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown.
4. The engine should deposit in the aridity and ventilated well place, avoid exposing directly in the sunshine.
5. Before the long term storing, you should run out of the gasoline in the fuel tank.

Package Included:
- 1 x Motor Boat Engine
- 1 x Spark Plug
- 1 x Water Pump Leaf
- 1 x Locating Pin/Split Pin
- 1 x Tool Kit Set
- 1 x User Manual