2 Stroke 3.5HP Heavy Duty Outboard Motor Boat Engine w/Water Cooling System

 2 Stroke 3.5HP Heavy Duty Outboard Motor Boat Engine w/Water Cooling System  

Description
- There are two pull starter included in the parcel(one is the machine, another one for spare) we don't supply wearing parts (pull starter)for free.

Specifications:
- Overall length: 92CM
- Overall widteh: 36.5cm
- Overall height: 22cm
- Transom height: 42cm
- Full throttle perating range: 4000-5000r/min
- Maximum output: 2.5kw(3.5HP)
- Speed: 20km/h(four people)
- Type: 2-stroke
- Ignition system: CDI system
- Starting system: Manual start
- Staring carburetion system: Choke start]
- Propeller mark: 7-1/45-A(inch)
- The engine and the propeller ratio: 2:1
- Recommended fuel: Regular unleaded gasoline
- Fuel to oil ratio: 30:1
Gear ratio: 27/13
-
- Maximum speed: 10 km / h
- Built-in fuel tank: 1.3L
- Fuel consumption per hour: 1.5L

When at normal cruising,the appearence of the senveth picture. Falling back the boat,
the appearence of the outboard motor likes the eighth picture . Falling back the boat, you should drive slowly otherwise the boat will not stable. The outboard motor backet can revolve 360. Only in simple let the engine revolve 180 and the operation handle face back, the boat can fall back to drive.
 
Announcements
After in the sea water or turbid water cruising
1.Use the fresh water cleaning the outboard motor
2.With the moderate velocity circulating the engine, cool off the water chanel with fresh water.
3. Before completely running out cooling water, don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown.
4. The engine should deposit in the aridity and ventilated well place, avoid exposing directly in the sunshine.
5. Before the long term storing,you should run out of the gasoline in the fuel tank.