| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $67.52 | $66.14 | $64.08 | $61.32 | Contact US |
Autonics MD5-HD14 Secondhand 5-Phase Stepper Motor Driver Boasts High Subdivision Precision
$76.76
The Latest DDCS Version4.1 4 Axis Independent CNC Offline Controller Machine and Manual Pulse Generator DDPMG
$329.72
The Latest DDCS Version4.1 3 Axis Independent CNC Offline Controller Machine and Manual Pulse Generator DDMPG
$310.28
3 phase Stepper Motor Driver 3MD560ES For NEMA 17/23/34 Stepping DC20-50V 1.35-5.8A for Engraving Machine
Features:
- Average current control, two-phase sinusoidal output current drive
- DC 20 ~ 50V power input supply
- Opto-isolated input /output
- 0vervoltage, under-voltage, over-current, short circuit protection phase
- 16 Subdivision and automatic half current function
- 8 options of output phase current setting
- With offline command input
- High speed start
- High-speed torque
Description:
- 3MD560ES subdivision three-phase hybrid stepping motor driver, with DC 20 ~ 50V power input supply for drive range 24V ~ 50V, current less than 5.8A, 42 ~ 86 mm diameter three-phase hybrid stepping motor. With technology of AC servo drive current loop subdivision control, the motor with stable torque, low-speed smooth running, low vibration and noise, high precision positioning, the torque under high speed is also significantly higher than the two-phase hybrid stepping motor.
Application:
- Widely used in engraving machines, CNC machine tools, packaging machinery, transmission equipment and other devices that require a higher resolution.
The control signal definitions:
PLS+: Positive of pulse signal input
PLS-: Negative of pulse signal input
DIR+: Positive terminal of step directions input signal
DIR-: Negative terminal of step directions input signal
ENA+: Positive terminal of enabling offline input signal
ENA-: Negative terminal of enabling offline input signal
Offline enable signal is active once driving failure, and prevent any effective pulse, at the same time, the output power of the drive components is closed, and motor no maintain torque.
Specifications:
| Input voltage |
Single Phase 24～50V input |
|
Input current |
<6A |
|
output current |
1.35A～5.8A |
|
Power |
- |
|
work Temperature |
10-45C |
|
Humidity |
without condensation and water droplets |
|
Gas |
Prohibition of combustible gas and conductive dust |
|
weight |
300g |
Setting：
Parameter
|
Output(A) |
|||
|
SW1 |
SW2 |
SW3 |
Current Table |
|
off |
off |
off |
1.35 |
|
on |
off |
off |
1.86 |
|
off |
on |
off |
2.6 |
|
on |
on |
off |
3.2 |
|
off |
off |
on |
3.8 |
|
on |
off |
on |
4.45 |
|
off |
on |
on |
5.2 |
|
on |
on |
on |
5.8 |
Setting:
|
SW5 |
off |
on |
off |
on |
off |
on |
off |
on |
off |
on |
off |
on |
off |
on |
off |
on |
|
SW6 |
off |
off |
on |
on |
off |
off |
on |
on |
off |
off |
on |
on |
off |
off |
on |
on |
|
SW7 |
off |
off |
off |
off |
on |
on |
