315/433MHz DC 12V Single Channel Learning Code Wireless Remote Control Relay Module

315/433MHz DC 12V Single Channel Learning Code Wireless Remote Control Relay Module
Descriptions:
- The Single Channel Learning Code Wireless Remote Control Relay Module gives you full control over the garage door.Wonderful wireless digital remote rontrol switch for home appliance! Just take a remote controller and you can easily control all electrical appliances at home, moreover, the remote control switch easy installation and use conveniently!This , Garage Door Remote Control has a high speed recording. This Wireless Remote Control Switch is a low cost. This Wireless Remote Control Switch Board remote control is with high quality, can last long time. So what are you still waiting for?
Specifications:
- Working Voltage: DC 12V
- Operating Frequency: 315MHz / 433MHz
- Static Current: 8mA
- Sensitivity: -103dBm
- Operating Temperature: -15°C~ +70°C
- Modulation Method: ASK
- Encoding Type: Learning code
- Size: 55 x 40 x 18mm / 2.2 x 1.6 x 0.7in (L x W x H)
Features:
- Small, compact size
- Low current draw
- The Garage Door Remote Control is ideal for general purpose in receiving date and controlling signal
- Used in garage door, roller shutter door or windows, remote control door lock, etc
How to reset Remote Control
- If you want to add another remote control for your garage door opener or need to replace a dead battery and reprogram an existing remote, chances are you'll have to reset the opener with the base unit for it to work. The process involves just a few steps and is relatively easy to do
- Replace the battery by opening the remote, taking out the old one(s) and putting in the new one(s). Make sure you buy the right battery for your remote. Match the battery type, size and voltage that came with the remote
Use a step ladder to access the garage door motorized unit, usually equipped with a safety light. Locate the reset or "learn" button on the unit. Many times, this small button is recessed, so you might need a pen or pencil to reach it
Push the reset or "learn" button on the opener. While the reset indicator light is blinking for about 30 seconds, point your remote at the opener, then press and hold the remote button that opens the door, and the reset light should stop blinking and glow steady to indicate the controller and opener are now synchronized. If the process doesn't work the first time, try again to make sure you pressed your button during the time when the indicator light is blinking
Package Included:
- 1 x 315 / 433MHz DC 12V Single Channel Learning Code Wireless Remote Control Relay Module