| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $15.11 | $14.80 | $14.34 | $13.72 | Contact US |
Proxmark3 PM3 RDV2 + 7.0 Software ID/IC Card Copier RFID Duplicator Reader Support Dual Frequency Card
$107.94
Smart Door Lock Deadbolt Lock Supports Fingerprint + Password + IC Card + Tuya APP + Key + Gateway
$74.98
Smart Door Lock Deadbolt Lock Supports Fingerprint + Password + IC Card + Tuya APP + Key to Unlock
$59.92
4 Channel Relay Wireless Remote Control Switch DC 12V Receiver with Peach Wood 4-Button Transmitter for Gate Garage Door
Specification:
- Working voltage: DC12V
- Quiescent condition: less than 6mA
- Working temperature:-40 +80 deg c
- Receiver sensitivity: more than -105dBm
- Working frequency: 315MHz
- Output voltage: DC and AC is optional
- Output current: less than 3A
- Max load current: 10A
- Size: 72mm*52mm*26mm
Transmitter:
- Remote Distance: 200M
- Operating Voltage: DC 12V
- Frequency: 260-440MHZ
- Operating Current: 13 mAh
- Code Type: Fixed code / Learning code
- Size: 72 x 52x 26mm (L x W x H)
Applicable Scopes: Auto door, window, lifting equipments, entrances, accesses,
up and down controller, alarm system, industrial control, security, etc
Instruction:
Output working way:
1. Self-lock ---connect the JP1 with the cutting out cap.
2. Jog---the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
3. Inter-lock-/Latched --- Connect the Jp2 with the Cutting out cap,
4. 2 Channel is self-lock and 2 channel is Jog, connect the Jp1 and Jp2 with the cutting-out cap .
- Jog/Momentary: press one button is ON . loosen your finger on the same button is OFF .(need one channel switch and one buttons remote control )
- Self -lock/Toggle: press one button for one time is ON .press the same button again is OFF .need one channel switch and one buttons remote control
- Inter-lock/Latched : press one button is ON , press another button is OFF . (need one channel switch and 2 buttons remote control
Learning and remove method
1. Press the learning code .the indicator flash, loosen your finger ,press any button of the remote control ,the indicator flash 2 times and off .it mean you learn it successfully .
2. It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote control
3. Remove/clean: press the learning button about 8 seconds , the indicator turn on to off , it means the information that you keep have been removed successfully.
Package Includes:
- 1* 12V 4CH Receiver
- 1* 4 Keys Transmitter
