| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $28.27 | $27.70 | $26.83 | $25.68 | Contact US |
GT235 Coating Thickness Gauge with 0-1800μm Range for Iron and Aluminum & Automobile Paint Surface
$52.39
Fardriver ND72530 72V BLDC Controller Brushless DC Controller 8000W Rated Power for Electric Scooter
$249.39
Nanjing Fardriver IPMSM Controller ND72200 72V 50A/200A IPMSM Controller Sine Wave Controller for Electric Scooter
$72.71
400W 24V Car Defroster Car Heater Fan 2 Air Outlet 90℃Winter Warmer w/Leakage Protection Switch
Features:
- Used for defrosting and demisting
- The temperature of one outlet can reach to 90℃
- This product heats up quickly and reaches the maximum temperature in 10 seconds.
- Super quite without noise, saving power
- Outstanding Performance: continuously used for 8 hours without affect your ignition system
- This product uses OTL circuit and temperature to automatically control leakage and protect the switch output.
- The use of imported tungsten wire plate heating plate and high-speed fan can make the temperature higher and the wind larger, and the glass defrosting car has obvious heating effect.
- Installation: Pure copper cable can be connected to the cigarette lighter plug, or directly connected to the battery or generator (Battery is not included)
- With this warm air heater, you don't have to worry about the warm air in the car is no enough in the car in winter
- Provide the comforts for travel, camping, glass defrost mist
Specifications:
- Material: Metal
- Voltage: DC 24V
- Rated Power: 400W
- Switch: A Leakage Protection Switch
- Air Outlet: 2
- Temperature: About 90°C
- Installation Size: 18.5 x 12 x 10cm
Package Included:
- One Set of Car Heater
Note:
- Do not open the internal circuit and special circuit. Please connect it securely during installation. Do not misuse the positive and negative poles during use to avoid burning the fan, the red wire positive pole and the black wire negative pole. It is recommended to use copper wire and connect directly. For the use of the battery, it cannot be used for a long time after quenching to avoid the consumption of the dry battery and affect the start-up.
- The air outlet should be kept at a certain distance from the glass to avoid rotting the glass. It can be fixed on the workbench with self-tapping screws. It can also be fixed in the hidden place with the side. It is not recommended to use the fuse to avoid affecting the current and affecting the heat dissipation.
