5A DC Step Down Buck Power Supply Module LCD Voltage Current Display with Shell Kit

5A DC Step Down Buck Power Supply Module LCD Voltage Current Display with Shell Kit

Parameter
- With calibration function
- Input voltage: 6V-32V
- Output voltage: 1.5-35V continuous adjustable (only as the buck module, input must be more than output as much as 1.5V and above)
- Output current: Adjustable, maximum 5A (recommended <= 4.5A, if over 3A or 35W,Please pay attention to the cooling.  The constant current can be adjusted when output voltage is more than 2V. Current regulation works under constant current .
- Output power: maximum 75W (recommended<= 100W)
- Operating temperature: -20~+70 degrees
- Operating frequency: 180KHz
- Conversion efficiency: up to 96%
- Short circuit protection:Yes
- Input reverse protection: No
- Output anti reflux: No, for charging Please add a diode (not include)
- Installation:8* Pillars, 8 *3mm screws
- Connection:Wiring terminal or welding terminal, IN for the input, OUT for the output
- Module size: L 65.6mm*W40mm *H 25mm
- Weight: 77g
- With shell kit, assemble it yourself.

NOTICE:
- Current can be adjusted under contant current. And it will the ocnstant current mode when the actual load output current should be more than the set current.  
- It is normal if there is voltage down about 0-0.2V when loading.
- Please pay attention to the cooling if over 3A or 35W.
- The default voltage is about 20V. If you cannot adjust the output voltage,please counter clockwise rotating ADJ-V potentiometer for more than 10 laps until the voltage changes.

Package list:
- 1 x Power Supply Module