5W 5000mW 5.8G VTX Transmitter Video Transmitter Drone Transmitter with Antenna (without Camera)

5W 5000mW 5.8G VTX Transmitter Video Transmitter Drone Transmitter with Antenna (without Camera)

Features of VTX Transmitter:
* 5W video transmitter
* 4 adjustable powers: 200mW/500mW/1.2W/5W
* Dual heat dissipation ways and stable performance
* Powered by 2-6S
* 5.8G 48 channels
* Built-in high-sensitivity silicon microphone
* TBS parameter adjustment protocol
* One-year warranty

Parameters of VTX Module:
* Product name: 5W VTX transmitter
* Working frequency: 5.8G
* Working voltage: 7-36V
* Working channel: 48CH
* Voltage output: 5V/200mA
* Adjustable power output: 200mW/500mW/1.2W/5W
* Current: 200mW/320mA, 500mW/460mA, 1200mW/650mA, and 5000mW/1.2A
* Product features: dual heat sinks and dual fans; stable performance
* Module indication: traditional single button and dual-light (red and blue) indication
* Antenna interface: standard SMA male interface. With a 2dBi antenna
* Wiring port: 6-wire, JST+1.25*3pin interface for external cameras

Package Included:
* 1 x VTX module
* 1 x 2dBi antenna
* 1 x Bundle of cables

Packaging Details:
* Weight: 0.2kg

Note:
* Due to the difference in power consistency of the amplifier chip, some frequencies can not reach 5W. The specific effect is subject to testing. Please make sure that you don't mind before purchasing. Thank you!
* Leave space when installing the VTX to ensure air convection around and heat dissipation of the module. Otherwise, the module overheat protection will start, reduce the power transmission, or even turn off the power transmission.
* It is recommended to ensure the correct voltage range and correct connection of the positive and negative poles before turning on the power to avoid burning the components.
* It is recommended to make sure that the antenna has been installed at the RF output before turning on the power. This can extend the service life of the module.
* Please read the relevant introduction of the product carefully before use. Be sure to connect the wires correctly to extend the service life of the module.
* One-year warranty is provided.

Button Description:
After power on, long press the button to adjust the channel, frequency, channel group and power in a loop. Long press to switch (red light), short press to switch (blue light), double press to switch Pit mode.

Step 1: Long press the button. When the red light flashes once, you can adjust the frequency (CH1-CH8). At this time, short press the button. When the blue light flashes once, it means CH1, twice means CH2, and so on. Adjust it to the frequency you need.

Step 2: Long press the button. When the red light flashes twice, you can adjust the channel group (A-R). At this time, short press the button. When the blue light flashes once, it means channel group A, twice means channel group B, and so on. Adjust it to the channel number you need.

Step 3: Long press the button. When the red light flashes three times, you can adjust the power. At this time, short press the button. When the blue light flashes once, it means 200mW. When the blue light flashes twice, it means 500mW, and so on. Adjust it to the power you need.

Step 4: Long press the button to save the parameters, and the red and blue lights will stay on.

Pit Mode:
Quickly press the button twice to turn on or off the transmission (Pit mode). The red and blue lights are on at the same time, indicating that the module is transmitting. The red and blue lights flashing indicate that the VTX is turned off and the Pit mode is turned on. In Pit mode, the working distance is only 1-2 meters.