6 AXIS CNC 2000KHz USB Mach3 Card Controller Stepper Motor Driver+Mach3 Remote Control Handwheel

6 AXIS CNC 2000KHz USB Mach3 Card Controller Stepper Motor Driver+Mach3 Remote Control Handwheel

Introduction:
- DDSMXV5.0 is designed by our Studio, it is a CNC system based mach3.
- It's version is 5.0 now. You do not need to add other Hardware,and you can  complete the signal conversion from the G-code to the movement of the  stepper motor drive control. This card is compatible.
- With most stepper drives and servo drives. And it is perfect weapon to replace mach3 parallel interface board.
- DDSMXV5.0 include DDSM3V5.0,DDSM4V5.0,DDSM5V5.0,DDSM6V5.0,they are 3,4,5,6 axes mach3CNC card.
- These 4 cards use the same Hardware platformDDSMXV5.0.They are limited to 3,4,5,6  axes for different voice of customer.They use the same manual.
- Each axis port can general 2000Khz plus for stepper motor driver or servo motor driver
- Simultaneously control 5 stepper motors.
- With 24 programmable input interface , can be configured to be "limit",  "E-stop" and other functions.
- With 14 programmable output interface, can work with water-cooling or  mist-cooling spindle and other devices.
- PWM/VSO（0-10V） spindle control mode .
- USB interface, support MACH3 software.
- DCDC electrical isolation.
- With maximum 200KHZ stepper motor pulse control output , suitable for most  machine system.
- Dimensions：120*72*20mm.
- Weight:180g.

Basic Configuration：
- CPU：1GHz；
- Memory：512MB
- 500MB Available disk space
- USB 2.0

Recommended configuration：
- CPU: 2GHz Dual Core；
- Memory: 2GB；
- 1G Available disk space
- USB 2.0

Product Feature:
- USB communication interface, and power supply for the board.
- 10 IO input, opto-isolated， It Can be configured to limit the emergency  stop and other functions， all of them are 2edg port.
- 14 IO input with no opto-isolated but with iso-IC. This port is set to IDC  2.54mm port.
- 14 IO output with no opto-isolated but with iso-IC. This port is set to  IDC 2.54mm port.
- 2IO output with opto-isolated for spindle.
- Up to 6 axes stepper-motor control port. Each port has up to 200KHz plus  output.
- COTEX-M3 of NXP-LPC is main control chip.

Hand/Manual Control Box Connect CNC USB Mach3

Introduction:

- SKTFTV1 is a hand control box only for USB MACH3 CARD (e.g: DDSM3,  DDUM6V5.0 and DDMDT card)
- This card connect with USB MACH3 CARD by USART port
- It's only need 4 wires, there are RXD/TXD/+5V/GND
- Most operation of software MACH3 is set to this box, it's convenient to  control the machine by this box

 Specification:
-  High performance, low price
- Most function of mach3 is set to this box
- Supply voltage: 5VDC
-  XYZABC 6 axes' coordinate display on the screen
-  FRO/SRO/SJR this 3 parameter display on the creen and can be modified
-  The function of move XYZABC by hand is set to the keyboard
-  Senior function (e.g: HOME,GOTO ZERO, ZERO is set to the keyboard)
-  Also base function (e.g: START,PAUSE,STOP,RESET is set to the keyboard)
- The material of this box is aluminium,and it's oxidized to deep blue
- The panel of this box is acrylic, and it's transparent

SKTFTV1 Hand Control Box English Manual:Click here

DDUM6V5.0 English Manual:Click here

Package list:
- 1  X     Controller Stepper Motor Driver
- 1X       USB Mach3