8-In-1 USB Blaster ARM Emulator FPGA Download & Burn Multifunction (For iTOOL3PRO Version)

8-In-1 USB Blaster ARM Emulator FPGA Download & Burn Multifunction (For iTOOL3PRO Version)

Comparison of Versions For iTOOL3PRO & For iTOOL3:
For iTOOL3PRO Emulator:
1. High-speed USB Blaster emulator
2. ARM SWD emulator
3. USB to RS-232 (independent)
4. USB to RS-485 / 422 (independent)
5. USB to UART (independent)
6. USB HOST1
7. USB HOST2

For iTOOL3 Emulator:
1. High-speed USB Blaster emulator
2. ARM SWD emulator
3. USB to RS-232 (multiplexed)
4. USB to RS-485 (multiplexed)
5. USB to RS-422 (multiplexed)
6. USB to UART (multiplexed)
7. USB HOST1
8. USB HOST2

Main Features:
1. Including USB to RS-232 function;
2. Including USB to RS-485 / 422 function;
3. Including USB to TTL function;
4. Built-in high-speed USB Blaster, support for all Altera CPLD / FPGA;
5. Built-in SWD debugger, supporting for Cortex-M 0 / M 1 / M 3 / M 4 / M 7 core devices, such as STM32F 0 / F 1 / F 2 / F 3 / F 4 / F 7 series, support for MDK / IAR;
6. Contains two USB HOST ports.

Function Introduction:
For iTOOL3:
- TTL (independent)
- RS-232 (Independent)
- RS-485/422 (independent)
- ARM download port
- FPGA download port
- USB HOST 1
- USB HOST 2

For iTOOL3:
- TTL (multiplexed)
- RS-232 (multiplexed)
- RS-485/422 (multiplexed)
- ARM download port
- FPGA download port
- USB HOST 1
- USB HOST 2

Package Included:
- 1 x Multifunctional Debugging Toolbox
- 1 x Data Cable Square Port
- 1 x 10P Gray Flat Cable
- 1 x 5P Red/White Flat Cable
- 1 x 3P Red/White Flat Cable
- 1 x 7P Red/White Flat Cable
- 2 x 6P FPC Connection Cables

Note: Other items pictured are not included, for demonstration purposes only.