| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $220.60 | $216.10 | $209.34 | $200.34 | Contact US |
SUGON 8650 Upgraded Version Hot Air Gun Rework Station 3-Mode 2 Heating Core 1300W High Power Desoldering Machine 110V/220V
$419.76
FUMA FT-618-NSRI Automation Screw Feeder Rotary Screw Feeding Machine 800CC Large Capacity with 1-6mm Adjustable Rail
$183.32
FUMA FT-618L-NSRI Automation Screw Feeder Rotary Screw Feeding Machine 2000CC Large Capacity with 1-5mm Adjustable Rail
$286.64
Note: Voltage:110V/220V(optional).Please leave a message.
Description:
- This item is 2in1 welding machine (1 x Pedestal,1 x Handheld welding gun)
- Jewelry welding machine can be used for fast welding of platinum, gold , K gold , silver, steel and precision welding of wires like ends of circle , oval buckle, fine wire. Argon can be accessed directly without soldering solder powder , solder joints are smooth and not black.
Specification:
- Power:500W
- Maximum current:80A
- Size: 10*165*140MM
- Weight:6KG/Set
- Voltage: 110V 220V
Installation and trial run
1.Connect electrode holder to the output cathode; connect anode electrode holder to the output.
2.Tungsten needle can be sharpened in grinding machine, that is to use sophisticated power management working principals . Inlet valve adjusted to argon ( argon models are applicable )
3.When installing tungsten needle, please make it protrude the welding head about 5MM . tungsten needle diameter is about 1mm.
Operation
1.Turn on the power switch.
2. Adjust the power knob. The general adjustment scale ( according to diameter of the part ) is 1 to 1.5 , ( fine ) adjustment scale is 7-8 (Can be adjusted according to scale of work requirements)
3. Hold the parts with tweezers and focus the end of the part to the tungsten needle (optimal distance is 5mm) ,the whole part can not touch the tungsten needle.
4. Stamp the foot switch. (then stepping away immediately). Welding is completed.
Caution
1. Your foot can not take long time on the pedal swith, Stamp the foot switch,then stepping away immediately. If you step on the pedal switch in long time, the machine is in short circuit condition, will burn out the machine
2. Flashing can hurt your eyes , please use good protection
3. When the foot switch is depressed , the hand should not simultaneously contact the metal parts of tungsten needle and tweezers, ,otherwise there will be acupuncture feeling
4. Non- professionals please do not open the machine
Package Included:
- 1 x DX-808 Pulse Sparkle Spot Welder kit
