9205 Original CDAQ Analog Input Module Used 32 Channels for NI National Instruments

9205 Original CDAQ Analog Input Module Used 32 Channels for NI National Instruments

Advantages:
* 32 single-ended or 16 differential analog inputs
* 16-bit resolution; 250kS/s total sample rate
* ± 200 mV, ±1, ±5, and ±10 V programmable input ranges
* Hot-swappable operation; Over-voltage protection; Isolation; Traceable calibration to NIST
* Operating temperature range: -40°C to 70°C
* Spring terminals

Description:
The 9205 is a C Series module that works with the CompactDAQ and CompactRIO chassis for NI. It features 32ch single-ended or 16ch differential analog inputs, 16-bit resolution, and a maximum sampling rate of 250kS/s. Each channel has ± programmable input ranges of 200 mV, ±1 V, ±5 V, and ±10 V. To prevent signal transients, the 9205 also has over-voltage protection of up to 60V between the input channel and the COM. In addition, the module features dual channel-ground-ground isolation for safety, noise immunity, and high common-mode voltage range. It has 1,000 VRMS transient over-voltage protection.

The 9205 is available in two types of connectors: a direct 36-pin spring-spring terminal connector or a 37-pin D-Sub connector. The 9940 strain resistant connector accessory for NI is recommended to add strain protection and high voltage protection to the 36-pin terminals of the ENET9205.

The 9205 is capable of D-Sub connectivity with an industry-standard 37-pin D-Sub connector and low-cost cable options for connecting to a wide range of accessories for NI or other vendors. Many suppliers also offer D-Sub cable customization services, offering encapsulated pin-out cables that meet your application needs. The 9333 for NI (or other 37-pin D-Sub connector) is intended for use with the NI 9205 with D-Sub. The 9333 for NI includes strain resistant screw terminal connectors and D-Sub welded backs for creating custom cable assemblies.

Specifications:
General:
* Product Family: Industrial I / O    
* Measurement Type: Voltage
* Form Factor: CompactDAQ; CompactRIO    
* Operating System / Target: for Windows real-time system    
* RoHS Compliant: Not    
* Isolation Type: Channel docking ground isolation

Analog Input:
* Single-Ended Channels: 32
* Differential channels: 16        
* Analog input resolution: 16 bits            
* Minimum voltage range: range -10V to 10V; Accuracy 6220μV    
* Minimum voltage range: Range -0.2V to 0.2V; Accuracy 157μV
* Simultaneous Sampling: No

Analog Output:
* Number of Channels: 0
        
Digital I / O:
* Bidirectional Channels: 0        
* Input-Only Channels: 0        
* Output-Only Channels: 0

Counters / Timers: 0
* Counters: 0
    
Timing / Triggering / Synchronization
* Triggering: analogy
    
Physical Specifications:
* Length: 9cm/3.5"    
* Width: 2.3cm/0.9"    
* I / O Connector: 36-position spring terminal; 37-pin D-Sub    
* Operating Temperature: -40°C to 70°C

Package Included:
* 1 x Analog Input Module