AD7606 16bit ADC Module 8CH Data Acquisition Module Supports 200kSPS Sampling Rate Per Channel

AD7606 16bit ADC Module 8CH Data Acquisition Module Supports 200kSPS Sampling Rate Per Channel

Description:
AD7606 is a 16-bit ADC data acquisition chip with 8-channel synchronous sampling. The sampling rate per channel can reach 200kSPS. It has built-in analog input clamp protection, second-order anti-aliasing filter, track-and-hold amplifier, 16-bit charge redistribution successive approximation ADC, digital filter, 2.5V reference voltage source, reference voltage buffer, as well as high-speed serial and parallel interfaces.

The module is powered by a single 5V power supply. It has on-chip filtering and high input impedance, so there is no need to drive an op amp and an external bipolar power supply. The 3dB cut-off frequency of the anti-aliasing filter is 22kHz. At a sample rate of 200kSPS, it has 40dB anti-aliasing rejection. The input clamp protection circuit ensures that the input withstands ±16.5V.

The module can be used in systems such as power line monitoring and protection, multi-phase motor control, instrumentation and control, multi-axis positioning, and data acquisition.

Advantages:
1. Provides rich development routines for users to choose and use
2. Supports three output modes. No need to modify the hardware
3. Measurement accuracy: The measurement accuracy is within 0.35mV for ± 10V input. And the measurement accuracy is within 0.2mV for ± 5V input

Parameters:
- Module name: AD7606
- Module type: ADC module
- Module power supply range: DC 5V (typical)
- Communication protocol: SPI serial communication
- Reference voltage: Using internal 2.5V reference
- Module provides routines: FPGA routines STM32F1/F4/H750 C8051 [supporting the FPGA/ARM development board (produced by LZDZ) directly using the routines; software version keil4/keil5]
- Module input voltage range: ±5V/±10V (through the board jump cap to select the input voltage or programming)
- Module current: about 20mA
- Input impedance: 1MΩ
- Module control level: 3.3V/5V
- ADC resolution: 16-bit
- Sample rate: 200Ksps (all channels)
- Oversampling modes: 6pcs (2x, 4x, 8x, 16x, 32x, and 64x)
- Input channels: 8 independent channels (simultaneous acquisition)
- Module input interface: KF127 terminal block
- Output data mode: 16-bit bus interface/8-bit bus interface/SPI serial interface (the board can support three modes without modifying the board resistance)
- Module protection: Reverse power supply protection (no voltage limit and current limit protection)
- Module size: 55mm x 56.5mm x 12mm/2.2" x 2.2" x 0.5" (LxWxH)
- Module weight: 27g/0.06lb

Package Included:
- 1 x Data acquisition module

Packaging Details:
- Weight: 0.2kg