AK-DB16VU Single Channel Retro Music Level Light DIY Kit 16Bit Support Voice Controlled Induction Input

AK-DB16VU Single Channel Retro Music Level Light DIY Kit 16Bit Support Voice Controlled Induction Input

Description:
- 16-bit level indicator light, capable of voice sensing input (default mode), can be connected to audio signal line input (mode switching required), adaptive AGC mode without human intervention in signal size, and professional dB mode. All function settings have a memory saving function, which allows for long-term fixed use once set.

Special Functions:
- Adopting a long warm light wick and a vintage pointer level lamp.
- The rising/falling speed of the main body of the light strip, as well as the holding time/falling speed of the peak light, can be adjusted separately.
- dB mode and AGC mode selection (ultra wide range AGC adaptive algorithm to ensure better performance)
- The AGC algorithm ensures better performance when the input signal amplitude changes.
- The brightness of the lamp can be adjusted in multiple levels.
- Exclusive software to eliminate input (line/microphone) noise function. It can significantly reduce the impact of input (line/microphone) noise.
- Single button operation.
- Can be easily spliced into two dual channel level lights (while ensuring synchronous single button operation).

Specification:
- Product size: 100 x 50 x 10.5mm
- LED luminescent length: about 24mm
- M3 screw hole centre space: 94 x 44mm

Front Value Introduction:
- The positive value is the level value, measured in decibels.
- The default AGC mode adapts to the amplitude and quality of commercial frequency signals.
- Switch to "DB mode" and use an audio cable to input the signal for the level value to have reference significance, AGC mode is suitable for viewing and entertainment.

Precaution:
- The DIY kit requires self soldering of LED lights, screw assembly of front and rear rubber plates, which is not readily available. Buyers need to have production tools such as soldering iron, tin wire, scissors, etc. They need to carefully weld and complete the production according to the following graphics and text before they can use it normally.

Note:
- This product need to weld it by yourself.
- LED is fragile, do not use force to squeeze or bend, otherwise it will break and be damaged!
- The pins can have glue, as long as you ensure that the soldering is in place!
- Please refer to the user manual for correct operation and function settings. (Please contact our customer service to get the user manual after payment.)
- We are not responsible for the production fails or is damaged due to the buyer's manual ability, tools, equipment, etc.

Package Included:
- 1 x Level Light Kit