AlexMos Latest Version V2.4 Firmware Simple Brushless Gimbal Controller W/ IMU & 3-axis Module

AlexMos Latest Version V2.4 Firmware Simple Brushless Gimbal Controller W/ IMU & 3-axis Module

PRODUCT DESCRIPTION    
- AlexMos SimpleBGC V2.4 "AlexMos" Simple Brushless Gimbal Controller. This board set is fully assembled and ready to use.Board have latest firmware designed
- by Alex Moskalenko.You can upload new software any time by onboard USB.

What's NEW    
- New option: skip gyro calibraion at startup. With this option checked, board starts working immediately after power ON.    
- New menu command and GUI button for manual gyro calibration    
- RC Map, RC Source moved to profiles. It allows to change RC control setting by switching profiles.    
-  (warning: after firmware upgrade, old RC Map setting will be lost)    
- RC YAW axis control may be inverted now by specifying Min.angle > Max.angle, like for other axis (but this setting not used for limiting, just for inverting).    
- I2C errors monitoring: LED will blink when I2C error detected    
- New option: gyro high sensivity. It doubles sensivity of the gyro, that equals to multiplying gains in the PID controller by 2.    
- It may be usefull for big DSLR cameras.    
- Translation to Chinese (thanks to Max) and Polish (thanks to Tomasz Ciemnoczulowski) language versions done.    
- The "Firmware Upgrade" tab in the GUI is working now and allows to upload a new firmware.    


Specifications:    
- 50*50mm size with 45*45mm mounting hole pattern for M3 screws    
- Onboard USB    
- Access to serial port, so a Bluetooth can also be hooked for easy tuning.    
- L6234 Motor drivers    
- 2 motors can be driven with this board    
- Atmega 328P with Alexmos Bootloader preinstalled    
- Controller weight: 15 grams    
- MPU6050 IMU included    


Package Included    
- IMU Board V2.4    
- Alex V2.4 main board(3 axi controller)    
- 3-axis optional module board    
- Power wire