AOSIBAO 6P1 Hifi Tube Amplifier Class A Parallel Single-Ended Vacuum Tube Amp 6.8Wx2 With VU Meters

AOSIBAO 6P1 Hifi Tube Amplifier Class A Parallel Single-Ended Vacuum Tube Amp 6.8Wx2 With VU Meters

Features:
- Cost-effective class A single-ended tube amplifier
- Shuguang tubes 5Z4Px1 + Shuguang 6N8Px2pcs + Shuguang 6P1x4pcs. Manual scaffold welding method is adopted to reduce the current loss and the authenticity of the transmission between the electronic components. Improve the reduction of sound quality in a dramatic way. Featuring low noise, low loss and better sound quality
- Using transformer parallel output technology, the internal resistance of the transformer is reduced by half compared with that of previous amplifiers. Better control of loudspeaker. The power has doubled and increased, maintaining the advantage of Class A single-ended. Its appeal is durable, and the bass is deep and powerful
- Use HiFi 150μF 450V capacitors for BC
- Multi-layer baking varnish shielding transformer cover can effectively shield current interference signals and obtain lower noise suppression. There is almost no noise suppression in normal listening distance. Make the sound quality more comfortable and natural, and the human voice is soft and sweet
- Pure copper gold-plated high-fidelity terminal. Use OFC gold-plated speaker output terminal and audio input RCA interface. Speaker output terminal can be connected to a banana plug or directly connected to speaker wire core
- Use replaceable three-pin plug as power supply input. Convenient for users to upgrade the power cord in the future

Provide DIY Renovation Service:
Modification project 1: Increase headphone output
You can add a headphone output interface, and the tube amplifier can work as a headphone amp.

Renovation project 2: Upgrade with imported tubes
Provide 6H8C to replace Shuguang 6N8P tubes, while the rest of the tubes are the same. Its sound is softer and more delicate.

Modification project 3: Output speaker impedance
Provides an increased output impedance of 4 ohms (the original machine has an output of 8 ohms), which can be used with 4 ohm or 8 ohm speaker impedance.

Modification project 4: Change input voltage
Provide 220V, 240V, 110V voltage change service. There is no charge for single-use voltage changes. There is an additional charge for dual-use voltage changes.

Attention:
- If you need the above DIY modification service, please contact us to cover the cost before placing an order. Thank you!

Performance Parameters:
- Model: M2c
- Rated output power: 6.8Wx2
- Frequency response: 20hz-20khz
- Input impedance: 100kΩ
- Output impedance: 8Ω (can be changed)
- Signal to noise ratio: 90db
- Input sensitivity: 500mv-2000mv
- Harmonic distortion: 1% (1khz)
- Tubes: Shuguang 5Z4Px1 + Shuguang 6N8Px2pcs + Shuguang 6P1x4pcs
- Dimensions: 260 x 215 x 150mm/10.2 x 8.5 x 5.9" (LxWxH)
- Weight: 7kg/15.4 lb

Package Included:
- 1 x Set of Tube Amplifier

Note:
- It is assembled and ready to use.