| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $12.95 | $12.68 | $12.29 | $11.76 | Contact US |
Netherlands Module Hypex NC252MP Power Amplifier Board 2x250W 2-Channel Audio Amplifier Module
$481.46
DAS AERO12 Active Speaker DSP Preamplifier Motherboard Audio Input Board for Convert/Road/Avant/Aero Series
$93.60
5-Wire DC Brushless Fan Testing Board with Storage Box for Internal and External Fan Detection
$25.23
Arduino 5V 50mA Bluetooth Module Wireless Communication Module Chip HC06 for DIY
Specification:
- Size: 35mm (diameter)
- Fixed hole: 2mm, hole distance 1200mil (30.48mm)
- Voltage: 5V (Note: if voltage is more than 5V, will damage the module)
- Current: no more than 50mA
- IO voltage: 3.3, 5V
- Chip: HC-06
- Pin spacing: 2.0mm compatible XBee pins
- Communication distance: <10m (open space)
- Set the name/password/baud rate and other parameters,power down save parameters through the serial port to send AT commands
- Master-slave mode can be switched by AT instruction.
- Host: used to search the slave equipment, can not be searched by other equipment
- Slave: used to be searched, can not search for other equipment forwardly
- Master slave connection is equivalent to the use of a serial line, this time on the part of the master, which is the penetration mode,
- Host can be paired with the machine, into the penetration mode. Can not match between the host and the host, the host can not match with the computer, mobile phone, PDA and other equipment
- Slave machine can not match to the slave one, slave machine can be paired with the host, computers, mobile phones, PDA and other equipment
- Host after the power will be initiative to find tha last matching device
- The default baud rate: 9600
- Default pairing password: 1234
- Default mode: slave mode(can be switched to the host via the AT command)
Package included:
- 1 x Bluetooth Module
