ArtNet2-CR021R 2CH Artnet to Dmx512 Conversion Artnet Dmx512 Network Converter for Tiger Touch MA2

ArtNet2-CR021R 2CH Artnet to Dmx512 Conversion Artnet Dmx512 Network Converter for Tiger Touch MA2

Description:
ArtNet2-CR021R is one standard Art-Net node. So, you can use other software, consoles, and controllers supporting Art-Net to distribute Art-Net data over the network. It is often used to extend the DMX outputs of Tiger Touch or MA2 consoles.

Features:
- It is a 2CH ArtNet-DMX512 network converter
- With 2 standard DMX512 data output ports, it supports 2x170 LED pixels
- ArtNet can be managed in broadcast or unicast mode
- 1 channel of ArtNet data can be input, and 2 channels of DMX.512 data can be output (a total of 1024 channels can be output)
- All network configuration parameters can be directly modified via its buttons and display. So you don't need to connect it to a computer to set up
- You can use other software, consoles, and Art-Net enabled controllers to distribute Art-Net data over the network. It is often used to expand the DMX output ports of Tiger Touch consoles,  MA2 consoles and the software for Madrix
- Installation: With a M10 screw hole. It can be fixed by a light hook or installed in any safe position. Easy to install thanks to holes on both sides of the converter
- Supports two power supply modes: Powered by mains electricity and POE (48V)
- Product dimensions: 12.5cm x 12.3cm x 3.5cm / 4.9" x 4.8" x 1.4"
- Widely used: Can be applied to stages, bars, wedding ceremonies, etc.

Package Included:
- 1 x Artnet to Dmx512 Converter

Packaging Details:
- Weight: 0.9kg

Note:
- Light hook is not included in the package.