| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $107.45 | $105.25 | $101.97 | $97.58 | Contact US |
Metal Black-silver LightMate AirPro High Precision Film Camera Light Meter 3 Dials 35° Wide-angle Reflective Exposure Meter
$96.24
Metal Black LightMate AirPro High Precision Film Camera Light Meter 3 Dials 35° Wide-angle Reflective Exposure Meter
$96.24
Metal Silver LightMate AirPro High Precision Film Camera Light Meter 3 Dials 35° Wide-angle Reflective Exposure Meter
$96.24
Auto-focusing Kit Electronic Automatic Focuser High Quality Astronomical Accessory for ASKAR FMA180 Pro Telescope
Description:
- With the upgrading of electronic astronomical accessories, electronic devices are increasingly used in astronomical observation and astrophotography. To better meet the needs of astronomy amateurs, Askar launched the FMA180 PRO AF Kit.
- The FMA180 PRO AF Kit is an astronomical accessory designed specifically for the FMA180 PRO lens to work with ZWO's EAF (electronic automatic focuser, not included) to achieve automatic and more accurate focusing. Using this kit allows astronomy amateurs to focus the astrograph more easily, improving the accuracy and efficiency of astronomical observation or astrophotography.
AF Components:
- A black square bracket to support the EAF
- A synchronous belt
- A synchronous pulley
- Locking screws
- Two M6 x 8 cap screws
- Four M4 x 8 button head screws
- Note: The FMA180 PRO and the EAF of the ZWO that appeared in the pictures are not included in this kit and they are for demonstration only.
Installation:
- Remove the original black dovetail plate and finder base from the FMA180 PRO. There are two screw holes on one side of the black bracket, which correspond to the two screw holes on the bottom of the FMA180 PRO.
- Use a 2.5mm wrench to screw the two M4x8 button head screws to connect the EAF bracket and the FMA180 PRO.
- Use a 1.2mm interlock wrench to screw the M3 x 2 locking screws to connect the synchronous pulley and EAF and insert the EAF with the synchronous pulley into the bracket.
- Install the synchronous belt with one end over the FMA180 PRO and the other end over the synchronous pulley.
- Adjust and attach the position of the EAF, then use two M4x8 button head screws to secure the EAF and the bracket. Place the FMA180 PRO with the bracket on the vixen swallowtail plate and secure it with two M6 x 8 cap screws. The installation of the FMA180 PRO AF Kit is ready.
Package Included:
- 1 x Set of AF Kit
Note:
- The FMA180 PRO and the EAF of the ZWO that appeared in the pictures are not included in this kit.
