B052 2 In 2 Out Amplifier Switcher 2 Channel High Power Stereo Speaker Selector w/ Volume Control

B052 2 In 2 Out Amplifier Switcher 2 Channel High Power Stereo Speaker Selector w/ Volume Control

Function Introduction:
1. Maximum support power is 200 watts: A and B power amplifiers with speaker selector switches are ideal for home theater sound systems. Maximum power of 200W per channel is suitable for 4-16ohm impedance speakers with a compact and thin desktop design compatible with any home theater setting.
2. Loudspeaker control: Two-channel speaker switcher controls up to two amplifiers with two sets of speakers connected to stereo or combo connections for free toggle selection, input/output via screw-type connector terminals that accept up to 14AWG speaker wires.
3. Independent audio control: Independent audio source volume control. Button design allows you to individually select each pair of speakers to customize your home listening experience, and to independently control volume and volume adjustments for each pair of speakers
4. Simple installation: The enjoyment of high-quality audio performance requires connecting the amplifier's left and right channel outputs to the left/right and A/B inputs on A mini dual channel controller with 2 pairs of 4 speakers.
5. Overload protection：Equipped with a front panel control switch consisting of volume control knob and main speaker switch. Provide good quality audio and overload safety protection circuit and long-term reliability.

Product Parameters:
- 2 input 2 output amplifier speaker selector switcher
- Convenient audio control, up to 2 amplifiers and 2 pairs of speakers
- Home theater stereo amplifier system support, independent audio source channel volume control
- Input/output: screw type connector terminal, compact desktop/desktop mini design
- Front panel button control center, the product does not need power supply
- Built-in electronic overload protection circuit
- Power Processing: Max. 200 watts per audio/speaker channel
- Speaker selector type: 2 soundtracks
- Speaker cable support: Max. 14 wire gauge (14 AWG)
- Support impedance: 4-16ohm
- Frequency response: 10Hz-50kHz
- Net weight: 1.77kg
- Product size: 215mm x 115mm x 55mm (LxWxH)

Package Included:
- 1 x Set of Amplifier Speaker Selector

Note:
- Other items pictured are not included, for demonstration purposes only. Thank you for your understanding!
- Input channels do not support 5.1 nor 7.1 power amplifiers.

FAQ:
Q: What should I do if I feel electric noise?
A: There are three ways to tackle this problem. 1. Normally, it’s just the noise level, generally you can't hear it at 100cm. Don't mind. 2. You can replace input signal source or replace audio signal cable with shielding and anti-interference. 3. Replace power supply or add a power supply filter.