| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $54.20 | $53.10 | $51.44 | $49.23 | Contact US |
Mini Duplex Hotspot Motherboard for MMDVM Digital Modem Box and 433MHz Antenna Support for DMR / D-Star / NXDN / POCSAG
$32.08
Mini Simplex Hotspot Motherboard for MMDVM Digital Modem Box and 433MHz Antenna Support for DMR / D-Star / NXDN / POCSAG
$20.62
FY-SP104U Noise Reduction Microphone Module 2 Waterproof Pickups for Echo Cancellation 32.8ft Range
$32.86
BPI-G1 Banana Pi G1 Open Debugger Board Programmer Burner Module Smart Home Control
Description:
Open Debugger is a set of programming tools in the development of STM series of microcontrollers, TI CC1x, 2x, TI CC3x series SOC, when STC Series MCU can be programmed quickly and easily debug, debugging programmer does not have to do something different series of chips switching plug tedious work. In addition, it also integrates a USB to serial port, which is a common interface for embedded development. It is also one of USB2.0 HUB, making it easy to extend to other USB tools. With it, no longer need to face a bunch of different writer, complicated mess of wiring, USB port deficiencies .
Operating Condition:
- Operating Voltage:DC 5V
- Operating temperature:0°C to 85°C
- The onboard voltage output::3.3 V
- Maximum output current:2000 mA
- Supported operating systems:
- Microsoft Windows 2000
- Windows XP SP2/SP3 operating system (32-bit versions)
- Windows Vista operating system (32 and 64 bit)
- Windows 7 operating system (32 and 64 bit)
- Windows 8 operating system (32 and 64 bit)
CC Debugger Interface:
Programming and debugging of the following 8051-based TI SoCs:
- CC1110, CC1111
- CC2430, CC2431
- CC2510, CC2511
- CC2530, CC2531, CC2533
- CC2540, CC2541
- CC2543, CC2544, CC2545
To SmartRF Studio control same apparatus. In addition, you can also control the following transceiver SmartRF:
- CC1120, CC1121, CC1125, CC1175
- CC1100, CC1101, CC110L, CC113L, CC115L
- CC2500, CC2520
It can also be used to program the PurePath wireless devices:
CC8520, CC8521
CC8530, CC8531
SWD Interface:
Programming and debugging mainstream ARM7 \ 9 \ 11, Cortex-A5 \ A8 \ A9 \ M0 \ M1 \ M3 \ M4
Supported MCU manufacturers:
ST, Freecale, Nuvoton, NXP, TI, Cypress, Atmel, Analog, Fujitsu, Toshiba,
Energy Micro...
Speeds up the programming and debugging functions 4Mhz: Write Flash Rom, EEPROM, ARF, and support for full speed, stepping, breakpoints
JTAG Interface
JTAG programming and debugging interface for all supported kernel.
UART Interface
STC series microcontroller programming and debugging output port for printing information.
Package included:
- 1 x Debugger Board
