Brother HD-390T High-precision Pointer Multimeter with High-sensitivity Moving-coil Meter Movement

Brother HD-390T High-precision Pointer Multimeter with High-sensitivity Moving-coil Meter Movement

Features:
- With built-in high-sensitivity moving-coil meter movement from Japan
- The pointer multimeter with 24 gears for measurement (with crystal LED holder, short circuit beep and 10A gear)
- With a hook bracket and non-slip protective sleeve on both sides
- The circuit board is designed with fiberglass double-sided gold-plated through-holes and covered with an insulating protective layer
- The gear switching reed adopts spring jewel bearing and diode bidirectional limiting circuit
- It has multiple protections such as anti-false detection and overload protection circuits and two quick-break safety fuse tubes (0.5A, 10A)
- DC voltage (including positive and negative voltage), DC current, AC voltage, resistance, transistor, LED, short-circuit beeping, decibel and capacitance (2000uF Max.) and small capacitance (<25μF) can be measured accurately
- Input impedance: DC 20KΩ/V, AC 9KΩ/V
- DC voltage detection range: 0.1V/0.5V/2.5V/10V/50V/250V/1000V (accuracy: ±3% FS)
- Positive and negative DC voltage detection range (center 0 position): ±5V/25V (accuracy: ±5% FS)
- DC current detection range: 50μA/2.5mA/25mA/250mA/10A (accuracy: ±3% FS)
- AC voltage detection range: 10V/50V/250V/1000V (accuracy: ±4% FS)
- Resistance detection range: X1/10/100/1K/10K (Accuracy: ±3% arc length)
- Short circuit buzz detection: when it is less than 100Ω, the buzzer will alarm
- Transistor detection, LED light: hFE: 0-1000 (can be directly measured through test probes or by adding a special jack)
- Diode detection: LV/LI and ICEO leakage current
- Decibel detection: -22dB to 62dB (voltage level) (need to pass through test leads and connect a capacitor to measure)
- Capacitance detection range:
  * C1 (RX1K) (2000uF); (accuracy: reference value) (measured directly by test probes)
  * C2: 0.025-0.25-25uF (three grades) (accuracy: ±3% FS) (must use a special capacitance detection box)

Specifications:
- Standard environmental conditions: 23℃±5℃, humidity <75%RH
- Working environment: 0℃～40℃, humidity <90%RH
- Storage conditions: -10℃ to 50℃, humidity <80%RH
- Tester size: 160mm x 105mm x 40mm/6.3" x 4.1" x 1.6" (LxWxH)

Package Included:
- 1 x Multimeter
- 1 x Pair of test leads
- 1 x Instruction manual

Packaging Details:
- Weight: 0.6kg

Note:
- One 9V 6F22 dry battery and two 1.5V R6P AAA dry batteries can be used. Batteries are not included in the package.