| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $11.62 | $11.39 | $11.03 | $10.56 | Contact US |
5-Wire DC Brushless Fan Testing Board with Storage Box for Internal and External Fan Detection
$25.23
New 5000W Pure Sine Wave Inverter Board Motherboard 5KW Over-load Protection (Precharge DC320-500V)
$108.99
OpenCV OAK-D-Pro Camera Module AI Embedded Machine AI Vision Kit for Depth Measurement/Image Recognition
$587.21
Parameters
1.Bluetooth version: 5.0 (without sunscreen, 15 meters)
2.Output channel: 2.0 channel
3.Chip model: AP3050D
1. Working mode: class D
2.Audio input: support bluetooth 5.0,AUX
3. Rated output power: 50W+50W
4. Frequency response: 20Hz to 20KHz
5. Working voltage: DC8V to DC26V
6. Recommended power voltage: DC19V
7. Fit speaker parameters: 4-8 ohms
8. size: 56*50*18mm
9.Net weight: about 61g
NOTE:
1.For DIY---The outer casing is a material package, It needs to be assembled by itself, and the material package is given a screwdriver.
2.---Attention!The heat sink tape 3M glue needs to be pasted to the chip by itself. Please refer to the picture in the description. The hotter the more sticky the thermal conductivity is.The shell version needs to be assembled by yourself. Screwdriver is given with the shell version.
3.For use---The power switch on the board is standby switch. After the switch is off, the machine is in standby state with low power consumption. If the power is completely turned off or the DC plug on the machine can be unplugged for a long time.
