Capacitive Torch Height Controller Kit for Flame CNC Cutting Machine CHC-200F

Capacitive Torch Height Controller Kit for Flame CNC Cutting Machine CHC-200F

Features:
- Increased more indicators shows different states of THC.
- Output of collision alarm, which is optical isolation output of THC, can be controlled CNC's Alarm input freeze machine's move. this signal is effective on both manual / auto mode. The max output is 200mA, able to drive most relay.
- Anti-collision function. At manual / auto mode, when metal or low conductive item such as hand touches sensor ring, THC would send collision signal and lift torch up until no collision exist.
- When HF cable is disconnected or weakly connected, it would be indicated on the decoupling indicator. So after installing HF cable, just shake the HF cable, the connection will be shown by the indicator.
- Sensitive and Accuracy is increased 100%.
- CHC-200F uses digital logic circuit for logic control, greatly enhanced anti-interference performance.

Main Parameters:
- Model: CHC-200F
- Power Supply: DC20V-36V or AC24V ± 10%, 50Hz
-Motor: DC24V, 1-4A
- Max. Power: 100W
- Work Temperature: THC-10~60℃; HF cable: -10~ 200℃; Sensor parts: -10~350℃
- Accuracy: ± 0.1mm (matters with lifter design);
- Auto height range: from cutting material surface 1mm-20mm
- HF-cable: 200mm~1300mm
- Size: 176 x 105 x 50mm

Package Included:
- 1 x THC Control Module
- 2 x Socket Connectors
- 1 x Sensor Ring
- 1 x Elastic Connector
- 1 x Insulation Part
- 1 x Fixture
- 1 x HF Cable