CCTV Tester IP Camera Tester w/7" IPS Screen 1920*1200 H.265 4K IPC-9900MOVTADHS PLUS

CCTV Tester IP Camera Tester w/7" IPS Screen 1920*1200 H.265 4K IPC-9900MOVTADHS PLUS

Functions:
- Test IP Cameras
- Test Analog Cameras
- CVI4.0+TVI4.0+AHD3.0+SDI Camera Image Test
- Ethernet Cable TDR Quality Test
- High-Precision Multimeter Module
- Optical Power Meter Module
- Visual Light Source Module (Red Light)
- TDR Breakpoint & Short-Circuit Test

Features:
- Intelligent Fast Charging: It can be recharged in just 10 minutes and works for half an hour  
- Dual 1000M Ethernet Ports: It can connect two cameras at the same time, providing 2000M bidirectional data transmission rate and improving network transmission performance. It can connect to the camera while connecting to the NVR to detect the traffic and bandwidth information of the connected network equipment and the quality of network communications.
- New hardware decoding supports for H.265 decoding. When your camera works in H.265/H.264 encoding mode, tested image resolution of major stream is up to 4K.
- OSD Menu: It supports ONVIF standards. Through the menu, you can customize the channel name and set the display position of the camera time. You can also search for multiple cameras on different network segments at the same time, and you can quickly switch 4K H.265 major stream, supporting 1200w network camera test.
- Multi-channel Preview: It can support 16-channel IP cameras for simultaneous preview and support for photo preview. One-click link to ONVIF to play images.
- Practical DH & HIK Tester: It can activate DH cameras in batches, modify the IP address in batches, and reserve the phone number for password retrieval. It can modify the channel name, customize the channel name and location, bringing in great convenience in testing DH cameras. For newly-activated HIK cameras, there is no need to add ONVIF users via manual operations. Click to play to view pictures directly under ONVIF and private protocols, support batch activation, batch IP modification, customize channel name, three font sizes can be adjusted freely, and  customize the display position of camera time .
- Customized Proprietary Protocols: Username and password logging capabilities make operations faster. For HIK and DH cameras, it can be activated directly at IPC TEST. After activation, preview the screen directly using the proprietary protocol, without configuring ONVIF, making it more efficient and convenient. It supports nearly 100 proprietary protocols, not support ONVIF cameras, but you can view image stream function, and select sub-stream to test camera images.
- Test Voltage & Electric Power:
POE and DC12V voltage and power detection: Test the voltage and power of POE exchange board, POE cameras and others, test DC12V input power supply, instrument 12V output voltage and power. Click the floating window twice to view the power value at any time.
Test POE camera power : When POE camera is powered on, it can simultaneously detect the POE camera power.
- Tester for 12V Power Supply of Cameras: Connect 12V power cord to the tester, and connect the test to your camera. And then start on-line test of 12V voltage, power and the like. Visually display power fluctuations through curve traces, support generation of reports, and continuous recording of test results.
- CVBS Loop: When the input and output terminals of the instrument BNC are shorted, the unit sends and receives the CVBS color bar signal and quickly tests the BNC cable.
- Upgraded Ethernet Cable Tester: You can figure out the types of your Ethernet cable via operation interface, indicator lights, and buzzer.
- Ethernet Cable TDR Tester: The device displays the status of line pair and supports dual network port simultaneous testing. Quickly measure the power failure or loop of the network cable, check whether the network cable is connected to the switch, and judge whether the line pair is faulty. The longest test distance is 180 meters.
- Link Monitoring: Advanced link monitoring supports for Ethernet statistics, error frame statistics, frame length statistics, and network port loopback testing. It will automatically remind you when a network loop occurs.
- Virtual IPC: Open the virtual IPC application and create virtual network camera signals without any action. When the NVR is connected to our device, the computer can play video to facilitate debugging of the NVR recorder function.
- You can download APP for Android system
- Screen Projection: Support projection through mobile phone or PC. By installing our screen projection app on your mobile phone or using the VLC player on your PC, you can receive the real-time picture of the IPC-9900 Plus, which is convenient for monitoring the installer to share information.
- Quick Pull-down Menu: One-click to use related functions.
- Upgraded Backlight Button: Enables operations even in darkness
- HD IPS Screen: high resolution 1920*1200
- Built-in Manual: The device with user manual inside for easy reading

Parameters:
- Display Screen: 7-Inch IPS Touch Screen, Resolution 1920x1200
- Ethernet Ports: Dual 1000M Ethernet ports, self-adapted 10/100/1000M
- WiFi: Built-in wireless WiFi and its speed 150M; receive and transmit wireless image from cameras
- H.265 Major Stream Tester: Brand new hardware decoder supports playing H.265 major stream camera image, resolution up to 4K
- Ethernet Test: 10/100/1000M Ethernet link status test, Ethernet traffic detection
- Advanced Link Monitoring: Support Ethernet statistics, error frame statistics, loopback testing, etc.
- IP Camera Test: ONVIF (with PTZ Control), ACTi, DH IPC-HFW2100P, HIK DS-2CD864-E13, SNZ-5200, TD-NC9200S2, IPC120L, HICC-2300T, IP5000-BC-13MP/IRS06-13MP, IPC, Kumkang8900, BY-1080Q, WEISKY IPC and the like
- Lens Simulation: Simulate 2.8, 3.6, 4, 6, 8, 12, 16, 25mm lens screen display area
- Focus Information Test: Test camera focus information, output signal quality, and image quality
- IP Discovery: Find the camera IP address on the entire network segment.
- Rapid ONVIF: Automatically log in to play images, support modification of IP address, channel name, generate test report, etc.
- HIK Tester: Activate HIK cameras in batches, modify IP in batches, and customize parameters such as channel name, user name, password, etc.
- DH Tester: Activate DH cameras in batches, modify IP in batches, customize channel names, user names, passwords, etc.
- CVBS Video Signal Test: 1-Ch Video IN BNC Input; 1-Ch Video OUT BNC Output, Support PAL/NTSC Format
- Video Image Zooming: Supports analog HD video image magnification, IP network camera image zooming and movement
- Video Record, Photo Browsing, Video Playback: Take screenshots and videos on the test screen, support naming in Chinese, saving and browsing photos, video playback, etc.
- Ethernet Cable TDR Test: Test network cable pair status, length, attenuation, reflectivity, impedance, Gigabit camera delay deviation and other parameters
- HDMI Output: 1-Ch HDMI output, supporting 1920*1080P
- 12V Power Supply Test: Real-time monitoring of the working status when the 12V power supply powers your camera, it generates test reports and saves test values with one click
- POE Power Supply Output: 48V POE power supply output, max. Power 24W
- DC 12V Power Supply Output: Output 12V, max. DC current about 3A, temporarily powering the camera
- USB 5V Power Supply Output: 5V 2A output power supply powers your smartphone
- Pull-Down Menu: POE power supply switch, instrument IP setting, WLAN switch, HDMI input, color striped output, LAN traffic monitoring and the like
- Audio Test: When one-channel audio signal inputs, you can test whether the sound is normal, record and save it. There is one-channel audio output which can be connected to your headphone.
- PTZ Control Test: Support RS485 bus, speed 600-115200bps. Supports for more than 30 protocols such as Pelco-D/P, Samsung, Panasonic, Lilin, Yann
- Color Image Generator: Send PAL/NTSC multi-format color bars via the video OUT port
- UTP Ethernet Cable Test: Test any two or more lines of network cable, the connection order and network cable number are displayed on the screen.
- Protocol Code Acquisition: Built-in serial port tool, can receive and display RS485 protocol code data from control device, and can also send hex code
- Network Test: IP address scanning, link scanning, PING packet testing. Quickly find the IP address of an IP camera or other device linked to the meter
- POE/PSE Voltage Test: Display the size of the power supply voltage and the link connection
Power Supply:
- Power Supply: DC 12V 2A
- Electricity: Built-in 7.4V, 5000mAh Capacity
- Charge: Fat Charge; Fully charged in 2.5 hours and works for 10 hours
System Parameters:
- Operation Setting: Touch Screen, Chinese & English OSD Menu for Option
- Auto Off: Turn Off/5-30 minutes
Operating Environment & Size:
- Operating Temperature: -10 to 50℃
- Operating Humidity: 30% to 90%
- Dimensions: 240 x 154 x 46mm
- Weight: 620g

Package Included:
- 1 x CCTV Tester
- 1 x BNC Video Cable
- 1 x S485 Control Cable
- 1 x Tool Bag
- 1 x Original Charger
- 1 x Ethernet Cable Test Box
- 1 x Grip Strip
- 1 x Power Supply Output Conversion Cable
- 1 x Audio Test Cable

Note:
- The tester comes with user manual inside for easy reading.
- Optional Accessories: Optical fiber test heads, line finder, TDR breakpoint alligator clip, and multimeter cable. Please contact us for extra prices.