| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $1,264.10 | $1,238.30 | $1,199.61 | $1,148.01 | Contact US |
80BL 48V 500W High Power DC Brushless Motor 3000RPM High Speed BLDC Motor + ZM-6618 DC Brushless Driver
$133.77
80BL 48V 500W High Power DC Brushless Motor 3000RPM High Speed BLDC Motor Support PWM Square Wave Drive Control
$100.81
CHAOLI 410W Long-axis High-Torque Brushless Motor Stepless Regulation High Speed Motor 39000RPM
$87.26
CNC 3040Z-DQ 4axis Router Engraver/Engraving Drilling and Milling Machine
Pls contact us for shipping fee before buying,because diffrent country take diffrent fees
Introduction:
- The CNC router is suitble for Industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.
- The cnc router is designed for large area engraving work such as Industrial or Hobby Prototype Building, Building Model Making, PCB, Advertising Signs, Artwork, Crafts, Aircraft Models, RC Model parts, etc. So, you can do engraving work at office or home.
- In addition, it can be upgraded to be installed a rotational axis.
|
Machine Dimensions： |
615X485X390mm |
|
Rack material： |
6061 and 6063 Hard aluminum alloy |
|
Engraving area： |
400X300mm |
|
Z-Axis Stroke： |
55mm, Engraving depth depends on the length of the tool edge） |
|
Acceptable material thickness： |
≤70mm |
|
Rail type： |
Chromeplate shaft+Linear Bearings,）(Surface hardening 61HRC) |
|
Type of screw： |
Ball screw,Pitch 4mm |
|
Spindle motor： |
230W/11000r/min（(Very small noise)） |
|
Collet type： |
ER11,1/8"(3.175mm) Collet |
|
Stepper motor and drive： |
two-phase hybrid stepping motor , 1.8A/PHASE,40N.cm, 8 segments drive. |
|
Maximum operating speed： |
4000mm/min (Engraving speed : 300-3000mm/min) |
|
Repeat positioning Accuracy： |
0.04mm |
|
Communication interface： |
Parallel port (Must use the desktop computer, Does not support laptop) |
|
Software Compatability： |
Mach3/Emc2/Kcam, (Type3,Wentai, ArtCAM,coppercam) |
|
Command code： |
G code/.nc/.ncc/.tab/.txt |
|
Machine weight： |
28kg |
|
|
|
|
|
|
|
Rotation Axis (4th Axis) Description:
|
Chuck Size: 65mm self-centering chuck Center height: H = 55mm Clamping diameter: 65mm or less Deceleration mode: synchronous wheel / belt Deceleration ratio: 3:1 Stepper motor: 57 type / 1.5A Stepper Drive: T65-axis drive Positioning accuracy: 0.075 ° |
Packing list:
- 1 × Engraving machine
- 1 × Control box
- 1 × Parallel port cable 25pin
- 1 × Power cable
- 1 × Tool box and tools
- 3 × Axis motors
- 1 × Rotation axis
- 1 × tool auto-checking instrument
- 1 × CD of manual and software MACH3
