DA10PRO HIEND Flagship Level Audio Decoder Dual Core AK4499EX Full Balanced High Fidelity Decoder Support DSD512

DA10PRO HIEND Flagship Level Audio Decoder Dual Core AK4499EX Full Balanced High Fidelity Decoder Support DSD512

Specifications:
- Input method: USB-PC (support OTG), optical fiber, coaxial, AES/EUB, I2S-HDMI, AUX analog signal, Bluetooth 5.1
- Output mode: RCA single-ended line, XLR balanced line
- THD + N: > 0.0001% at 1KHZ
- SNR: >127DB
- Dynamic range: 127DB for RCA single-ended line; 133DB for XLR balanced line
- Amplifier power: 2000MW
- Amplifier resistance: 32-600ohm
- XLR interface definition: European and Japanese standards: 1 ground, 2 cold, 3 hot
- Size: 266 x 344 x 55mm (Slight error in manual measurement)
- Weight: 4.1KG
- Power consumption: > 30W
- Sampling rate supported by each input interface:
- PCM: 44.1KHZ 48KHZ, 88.2KHZ, 96KHZ, 176.4KHZ,192KHZ, 352.8KHZ, 384KHZ [Among them, USB and I2S support all sampling rates, and S/PDIF/OPT supports up to 192KHZ]
- DSD: 2.8 MHZ (DSD64) - DOP NATIVE
  5.6 MHZ (DSD128) - DOP ,NATIVE
  11.2 MHZ (DSD256) - NATIVE
  22.5792 MHZ (DSD512) - NATIVE [where USB and I2S- HDMI support all DSD formats S/PDIF and AES/EBU support DSD64 DOP mode, OPT does not support DSD]
- Bit width: up to 32 BIT OVER USB AND I2S-HDMI
- Up to 24 BIT OVER S/PDIF, OPT
- Bluetooth protocol: LDAC, for APTX-HD, for APTX, SBC, AAC

Electrical standard of each interface:
- The USB input socket is a standard USB-B female socket, and the USB power supply range is 4.5V-5.1V;
- The SPDIF interface inputs standard S/PDIF signals, and the input impedance is 75 ohms, AES input impedance is 110 ohms;
- The power input is 115V/ 230V AC, and a double 25-watt customized transformer is used inside to supply power to the digital circuit and the analog circuit respectively;
- I2S input is LVDS level in the form of HDMI interface, compatible with most front-end equipment.

Package Included:
- 1 x Host
- 1 x Remote Control