DC Servo PID Motor Drive Module USB Serial Port I2C Control Closed Loop Feedback for Arduino Routine

DC Servo PID Motor Drive Module USB Serial Port I2C Control Closed Loop Feedback for Arduino Routine

Description:
1. Neurons intelligent PID motor drive module is an intelligent module that is equipped with a built-in controller for PID calculation and ladder diagram control, and a drive circuit on the board for DC motor drive.
2. By using this module, you can control the forward and reverse speed of the dual-channel motor (with encoder) by sending only 8 bytes of commands (or 5 bytes of I2C interface) through the serial port, and you can even directly set the motion of the motor distance. The PID parameters and ladder diagram parameters of the two motors can be set separately.
3. The control of the 2 motors is independent of each other and does not interfere with each other. The Neurons II driver module has 2 control interfaces: UART and I2C interface. There is also a USB to UART chip (Atmega32U4) on the module, so you can use a computer to send commands through the USB interface to directly control the drive module. You can also use other microcontrollers STM32 / 51 / Arduino, etc. to control the drive module.

Features:
1. Upgraded version of dual DC servo drive module, motor drive and intelligent control functions.
2. Onboard dsPIC + Atmega32U4 dual core, capable players can use as Arduino Leonardo.
3. Four-layer immersion gold plate, with excellent design and workmanship, and stronger driving ability.
4. Powerful driving ability, can drive 6V ~ 25V DC brush motor. Maximum continuous current per channel 4A, peak current 5V (larger current not tested).
5. The driving circuit generates little heat.
6. With mini USB interface, easy to connect with computer.
7. The closed-loop speed / position adjustment function can be used without writing a line of code.

Package List:
1 x Drive Module