DHZ DMA Board Direct Memory Access Board with 5-Person Independent Firmware from Silver Shield

DHZ DMA Board Direct Memory Access Board with 5-Person Independent Firmware from Silver Shield

Description:
Based on the original design, it is added with a power supply switch, an independent switch and a heat sink.

Features:
- ARTIX-7 FPGA: The LEET DMA PCIE board is designed for high performance, with ARTIX-7 35T FPGA chip.
- Hi-speed USB 3.0: The device enables communications up to 160MB/S via USB3.0. The FT600/FT601 is a SUPER SPEED USB3.0 to FIFO interface bridge chip, offering up to 5GBPS bandwidth.
- Good compatibility: Fully developed and optimized according to PCILEECH, it can run PCILEECH better. The LEET DMA PCIE board reads and writes to the target system memory. It can also be used with any PCILEECH-compatible software.
- User-friendly: Using on-board JTAG, you can easily flash the LEET DMA board simply by connecting USB from the update port. You don't have to use complicated JTAG cables.
- Support OPENOCD to flash: Easily flash your firmware into your device.
- Custom firmware: The LEET DMA board comes pre-loaded with Silver Shield custom multiplayer firmware, so it looks like a common device for any software on a host system. Just plug in and get started, no flashing required.
- The board has a "KILL-SWITCH" which can be used if you don't want to use the DMA board but don't want to remove it from your computer. The board also has a connector for an external KILL-SWITCH.

Package Included:
- 1 x USB-A to Type-C USB3.2 Data Cable
- 1 x PCIE Full Height Bracket
- 1 x DHZ DMA
- 1 x Independent Switch
- 1 x Heat Sink
- 1 x M3x5 Screw for Bracket
- 1 x Screw to Fix PCIE Bracket to Computer Case

Attention:
- Before purchasing, please understand the requirements of DMA for computer configuration. If DMA does not work due to computer configuration, we are only responsible for providing technical assistance. Thank you for your understanding!
- The device is prohibited for illegal use!
- Returns caused by non-commodity quality problems shall be borne by customers!
- PCIE devices does not support hot plugging. Improper operation can damage your hardware!