| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $13.04 | $12.78 | $12.38 | $11.85 | Contact US |
NF-919 Multifunctional Optical Fiber Tester 1310/1550nm Optical Power/Source Light/VFL 3-IN-1 Tester
$54.17
NI-210SC Portable Dual Channel VI Curve Tester 18 Levels Frequencies Adjustable with 2.0-inch TFT Screen
$91.37
EU Edition LCD TV LED Backlight Light Strip Tester Wide Voltage Input and Output for Non-removable Screen Testing
$19.22
Digital Satlink WS9603 Satellite Finder Meter For TV Dish Pointing and Alignment
Description
- Connect to your LNBF and receiver to the satellite finder to track the clearest setting for the satellite you wish to tune to. Meter with LED display helps to locate best signal strength of the signal and signal quality. Meter with audio tone helps to align satellite antenna to signal without looking at display. Audio tone gets louder at the higher signal quality and signal strength also works with Multi LNB dish systems.
Features:
- Connect the Satlink WS-6903 Satellite finder to your LNB and Receiver to locate any available to your location satellite. Compatible with Bell, Dish Network, DirecTV, and All other TV or Radio Satellites.
- The LED display of the Satlink WS-6903 helps you locate best signal strength.
- The audio tone in this satellite meter helps to align satellite dish antenna to signal. Audio signal gets louder at the better signal quality.
- Works with multi LNB dish systems and multiple dish system.
- ON or OFF for audio toner.
- The Satlink WS-6903 Satellite signal finder has four steps gain for the satellite signal.
- This Satlink model is able to increase or decrease the gain of the meter.
Connection & Operation:
- Connect a jump cable from LNB to satellite Finder WS-9603 "Satellite" port. Connect the "Receiver" port to satellite receiver.
- Make sure that satellite finder is properly connected. Plug in the AC cord and turn on the satellite receiver.
- Set the dB gain to 1 or 2 by using the ATT button, then signal LED will show from 15 to 30, then you can adjust the dish position, when you hear the buzzer alert and the value of signal strength will increase, that means you getting the satellite signal.
- Set the dB to be 3 or 4, adjust the dish again until the value of signal strength is at maximum you can get, now lock the dish and scan channels with your satellite receiver.
Package includes:
- 1 x Satlink WS-6903 satellite finder tool
- 1 x Retail packaging
