DSE7320 Automatic Start Generator Controller Module Panel AMF Controller Replaces DSE 7320MKII

DSE7320 Automatic Start Generator Controller Module Panel AMF Controller Replaces DSE 7320MKII

Product Description:
It is an Automatic Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, gen-set applications. Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs, remote PC and via SMS text alerts (with external modem).

It will monitor the mains (utility) supply and includes USB, RS232 and RS485 ports as well as dedicated terminals for system expansion.

Features:
- 4-Line back-lit LCD text display
- Five key menu navigation
- Front panel editing with PIN protection
- LED and LCD alarm indication
- Customisable status screens
- Power save mode
- Support for up to three remote display units
- 9 configurable inputs
- 8 configurable outputs
- Flexible sender inputs
- Configurable timers and alarms
- 3 configurable maintenance alarms
- Multiple date and time scheduler
- Configurable event log (250)
- Control logic facilities
- Easy access diagnostic page
- CAN and Magnetic Pick-up/Alt. sensing
- Fuel usage monitor and low fuel alarms
- Charge alternator failure alarm
- Manual speed control (on compatible CAN engines)
- Manual fuel pump control
- Engine exerciser
- Protections disabled feature
- kW overload protection
- Power monitoring (kW h, kV Ar, kV A h, kV Ar h)
- Load switching (load shedding and dummy load outputs)
- Automatic load transfer
- Unbalanced load protection
- Independent Earth Fault trip
- USB connectivity
- Backed up real time clock
- Fully configurable via DSE Configuration Suite PC software
- Configurable display languages
- Remote SCADA monitoring via DSE Configuration Suite PC software
- User selectable RS232 and RS485 communications
- SMS Messaging (additional external modem required)
- Additional display screens to help with modem diagnostics

Benefits:
- 132 x 64 pixel ratio display for clarity
- Real-time clock provides accurate event logging
- Multiple date and time scheduler
- Set maintenance periods can be configured to maintain optimum engine performance
- Ethernet communications (via DSE860/865 modules), provides advanced remote monitoring at low cost
- Modules can be integrated into building management systems (BMS)
- Increased input and output expansion capability via for DSENet Licence-free PC software
- IP65 rating (with supplied gasket) offers increased resistance to water ingres

Specifications:
DC SUPPLY:
- CONTINUOUS VOLTAGE RATING: 8V to 35V Continuous
- CRANKING DROPOUTS: Able to survive 0V for 50mS, providing supply was at least 10 V before dropout and supply recovers to 5V. This is achieved without the need for internal batteries (not included). LEDs and backlight will not be maintained during cranking.
- MAXIMUM OPERATING CURRENT: 340mA at 12V, 160mA at 24V
- MAXIMUM STANDBY CURRENT: 160mA at 12V, 80mA at 24V
- CHARGE FAIL/EXCITATION RANGE: 0V to 35V

MAINS (UTILITY):
- VOLTAGE RANGE: 15V - 333V AC (L-N)
- FREQUENCY RANGE: 3.5Hz to 75Hz

OUTPUTS:
- OUTPUT A (FUEL): 15A DC at supply voltage
- OUTPUT B (START): 15A DC at supply voltage
- OUTPUTS C & D: 8A 250V (Volt free)
- AUXILIARY OUTPUTS E, F, G, H: 2A DC at supply voltage

GENERATOR:
- VOLTAGE RANGE: 15V-333V AC (L-N)
- FREQUENCY RANGE: 3.5Hz to75 Hz

MAGNETIC PICK-UP:
- VOLTAGE RANGE: +/- 0.5V to 70V
- FREQUENCY RANGE: 10,000Hz (max.)

Package Included:
- 1 x Set of Generator Controller

Note:
- Batteries are not included.