DSP 57 Two Phases Stepper Motor Driver PAS2-57508 DC80V 4.5A High Speed Good Performance DSP High Speed Chip

DSP 57 Two Phases Stepper Motor Driver PAS2-57508 DC80V 4.5A High Speed Good Performance DSP High Speed Chip

Description:
- This product is a high performance driver of the newest technology based on DSP high speed chip. The special current vector controlling techinolly enables the motor operate smoothly , good speed accelerating capacity, large torque supass traditional driver, better adaptability to sudden changes or frequent reversed pulse, less jammed or out of steps, can adjust to high grade occasion. the highest frequency is 2M

Specificaion:
- Voltage: DC 80V 24V,
- Current: 1 4.5A  adjustable
- Subdivision number of steps: 200, 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000.
- Suitable for all 57 and below 6A in all the following two-phase stepper motor
- High speed performance, smooth operating, small noise and vibration, semi - automatic flow. 
- Self operation,  smooth pulse, motor inertia, pulse filter (anti-interference) and other special functions (the user choose open or closed).
- With two phases 57-5A the stepper motor test, maximum no-load could run up to 5000 rpm, 1600 RPM can drive CNC stable work.
- Can reach as high as 80V high voltage power supply, which can provide good high speed performance
- Recommend 36V transformer and rectifier filter plate as power supply (36V alternating current rectifier, DC voltage can reach DC50V), each motor is calculated according to 150W power supply.
- Dimension: 118 x 76 x 35
- 4 mounting holes on two sides
- Hole diameter 3mm
- Hole center distance: short  23mm, long  113mm
- Weight: 0.3KG
- Differential signal input port, high speed optocoupler isolation.