| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $16.94 | $16.60 | $16.08 | $15.39 | Contact US |
Willsenton R8 KT88 45W+45W Vacuum Tube Integrated Amplifier Push-pull Power Amplifier (Black)
$1,621.96
Willsenton R8 KT88 45W+45W Vacuum Tube Integrated Amplifier Push-pull Power Amplifier (Silver)
$1,621.96
Willsenton R-800i Single Ended Class A Amplifier Vacuum Tube Integrated Amplifier 50W+50W 300B + 805
$2,912.97
Dual Channal LM4766 T Class Power Amplfier 2 x 50W Amp Kit Only
Description:
- THD + N at 1K HZ frequency continuous power output 2 * 30W, 8 ohm loads, the Distortion is 0.009%.
Features:
- SPiKe Protection
- Minimal amount of external components necessary
- Quiet fade-in/out mute mode
- Non-Isolated 15-lead TO-220 package
- Wide Supply Range: 20V - 78V
- Recommended voltage: AC 24-0-24, the power is 50W W/1ch * 2
- When install LM4766T, radiator and the heat sink must be absolutely insulated, so the LM4766 and the heatsink is non-conductive.
- Note: This is a Kit, you need to weld the component by yourself.
- The Picture is a working sketch, just for reference.
- 4766PCB size is 90 * 47 MM
- Weigh is 90 grams, including IC and large capacitors,
Parts List:
- Kit uses IC LM4766T
| Comment | Quantity |
| 10UF/25V | 2 |
| 221 | 2 |
| 220UF/10V | 2 |
| 50V4700UF | 2 |
| 100UF/50V | 1 |
| 104 | 2 |
| 105 | 2 |
| KBP25A | 1 |
| 10 | 1 |
| 22K | 5 |
| 1K | 2 |
| 680 | 2 |
| 10 | 2 |
| LM4766T | 1 |
| IN GND IN | 1 |
| AC24 0 AC24 | 2 |
| PCB | 1 |
| Insulation sheet, insulation tablets | 1 |
