Electric Dog Pet Fence Containment System Shock Collars Trainer Control Device 023

Electric Dog Pet Fence Containment System Shock Collars Trainer Control Device 023

Item Description
- Audible and Visual Wire Break Indicators-Should your buried wire ever break, a loud sonic alarm will sound accompanied by a flashing light;
- Speed Detect Anti-Run through-The faster your dog is moving, the quicker the higher level of intensity is issued;
- Built-in Lightning Protection-Protects transmitter from power surges caused by lightning strikes;
- Multiple Collar Operation-Add as many collars as you like to contain as many dogs as you have. There is no limit to the number of collars it can control. Please select the number of collars you want when you place an order.
- This fencing is a safe, reliable and pet-friendly way to train your loved pet dog to stay within designated areas, and away from roads, pools and other potentially hazardous zones. It is also the perfect solution to keep pets away from neighbors' gardens and flowerbeds.
- The Underground Electric Fence and Collar are easy to install and operate. The wire can be buried around the designated area while the collar will fit comfortably around your dog's neck in the same way as other dog collars. It is strongly advised that you do not test out the equipment while the dog is wearing the collar. Furthermore, allow your pet to wear the collar for several days before switching the system on, to ensure that your pet does not associate the collar with correction.

How does it work?
As your dog approaches unwarranted areas, the collar will make a slight beeping sound, thus notifying the dog that this area is off bounds. The sound will continue to increase as the dog moves towards the fenced area. Please note that this sound has no physical side effects or damages the animal's health in anyway. Over time, your pet will begin to naturally respect safe playing areas, thus protecting your pet.

The fencing system is able to cover up to 5,000 square meters (53,800 square feet), 1.2 acres of land, giving you a more reliable, economical and safe alternative to expensive wood or brick fencing.

System Highlights:
- Progressive tone stimulus- As the dog reaches the boundary a slight warning tone will be heard. If the dog does not change route then a small shock stimulus will occur after 4-10 seconds.
- Pulsed proportional stimulus- The shock stimulus will increase as the dog reaches unwarranted areas. Please note the stimulus is dog friendly, and will not exceed harmful limits.
- Variable field width control- You can control the exact width of the signal field. Rotating the filed width knob clockwise on the transmitter will increase the signal filed width, while rotating counter-clockwise will decrease the signal field width.
- Violation warning- If your pet crosses the wire then an alarm and flashing light will be activated.
- Motion sensor- The shock intensity will progressively increase with the speed of your dog. Therefore the faster the dog runs, the more intense the warning.
- Multi- Collar Operation- You can add as many collars as you like. Please select 1/2/3 when ordering.
- Large containment area- up to 5000 square meters (53,800 square feet), over 1.2 acres.

Caution:
- Read the instruction manual carefully before use.
- The electronic collar is for dogs only.
- Make sure to replace the batteries when they are low to avoid irregular operation.
- Prior to system activation, allow your pet to wear the collar for several days to get used to it, and also to prevent negative association with the collar and the correction system.
- The dog should NOT wear the collar for more than 12 hours at a time.
- DO NOT test or set up system while the collar is on the dog.
- Supervise your dog at all times while the correction collar is on. This is especially encouraged for the first few times.

TROUBLESHOOTING GUIDELINES
A. Dog is not responding to correction:
- Adjust the collar fit.
- Trim the dog's hair or use longer probes to make better skin contact.
- Change the battery in the collar receiver.

System Test Procedure:
- Whenever you experience a malfunction, you will need to do a Test Loop to determine which component - collar, wall transmitter, or yard wire - is not working. To perform the Test Loop procedure:
- Make a test loop using a piece of wire at least 4 meters in length.
- Remove the existing wire from your wall transmitter.
- Insert the two ends of the test loop wire into the wall transmitter.
- Turn the field width knob to a low setting.
- Place the test light on the collar receiver. With the collar in hand, move outside the field and approach the test loop. Make a mental note of the distance between the collar and the wire when the collar activates.
- Turn the field width knob to a medium setting.
- Back away from the wire and approach it again. Determine the distance between the collar and the wire when the collar activates. The distance should be greater on the medium range setting.
- If more than one collar receiver is used with the system, repeat the above test on each collar.

Results of System Test Procedures:
- If there is no green POWER light on the wall transmitter with the test loop wire in place, the wall transmitter is malfunctioning.
- As this unit has a protection function, if some matters or operate fault cause the system halt (no green POWER light), please unplug the power of the transmitter. After ten minutes plug the power again, it will work as normal.
- If the green POWER and OK lights are solid on the wall transmitter, but the collar does not activate on the test loop wire, the collar receiver is not working. - Change the battery in the collar receiver and repeat the test.
- If the red Break light on the transmitter turns on together with beeping sound, the problem is in the yard wire.

Package Include: