EP-AB015 2.4G/5.8G 39dBm Dual Frequency Wireless Signal Amplifier 4000mW WiFi Amplifier for Router/Drone/UAV

EP-AB015 2.4G/5.8G 39dBm Dual Frequency Wireless Signal Amplifier 4000mW WiFi Amplifier for Router/Drone/UAV

Features:
- Brand new and of high quality.
- Low noise reception gain.
- Signal activity LED indication
- High gain, high value, high performance
- Booster has a maximum output power of 8000mW
- Plug and play, easy to install, no need for drivers.
- It is very suitable for devices that increase the frequency of 2400-2500MHz.
- Increase the effective range and coverage of WiFi networks.
- Simply connect the amplifier between the standard antennas of the wireless router or wireless access point to observe the expansion of the range.
- The amplified wireless signal can even penetrate complex environments with walls and obstacles.
- Very suitable for 2.4GHz wireless LAN? 6?7? Starting from 6-7, it supports 802.11b, 802.11g, and 802.11n (only available in 2.4GHz mode).

Specification:
- Model: EP-AB015
- RF output power: 39dBm (8W)
- Frequency: 2400 - 2500MHz
- Standard: IEEE802.11b/g/n
- Working voltage: 6 - 18VDC, 12V/2V
- Operation mode: bidirectional, semi-duplex, automatic switching through carrier sensing
- Frequency response: over working range ±1dB
- Input trigger power: 3dBm (min.); -20dBm (max.)
- Working mode: TDD (test-driven development)
- RF output power: 37dB (5W)
- Transmitter gain: 17dB (typ.)
- Receiver gain: 11dB (typ.)
- Switch delay: <1us
- Noise ration: 3.0dB (typ.)
- Operating temperature: -40℃ ~ 70℃
- Working voltage: 6 - 18VDC
- Working humidity: up to 95%RH

Precautions:
- It is recommended that the input power of the RFIN port be between 7dBm and 13dBm.
- Before disassembling or replacing the antenna, please ensure that all power sources to the amplifier and AP/router unit have been disconnected.
- When is Booster and AP? 6?7? After the 6-7/Router connection is completed, restore the power supply to the Booster first, and then restore the power supply to the AP/Router.
- Outdoor antennas should be equipped with waterproof and lightning protection devices.
- Stay away from heat sources and maintain ventilation.
- Please comply with local regulations regarding electromagnetic radiation.

Package Included:
- 1 x WiFi Amplifier
- 1 x Antenna
- 1 x Power Adapter
- 1 x Cable Set

Note:
- This product does not come with a power supply. The product supports three types of power supply: 12V/1A power supply, 5V portable charger (power bank) and battery. You can choose the suitable power supply according to your needs.
- Heat dissipation is recommended, such as adding heat sink or radiator fan.
- Antenna should be screwed first, then plug the power adapter, finally connect the device.
- The output could reach 36dBm, when input power is 18dBm or 19dBm (default gain is 18dB).