ETCR6000B 60A Leakage Current Clamp Meter Automotive Leakage Current Tester DC AC Clamp Leaker

ETCR6000B 60A Leakage Current Clamp Meter Automotive Leakage Current Tester DC AC Clamp Leaker

Features:
- AC and DC leakage current meter, supporting clamp CT, non-contact measurement; safe and reliable to use
- Precise winding head design; range 0mA-60.0A, featuring high measurement accuracy
- Slender jaw design, strong adaptability, fully automatic switching gears; suitable for line testing of 600V and below
- Mainly measure automobile DC dark current, leakage current, etc., other AC and DC current, leakage current measurement
- Support knob zero adjustment, strong anti-interference, support data retention, automatic shutdown

Technical Parameters:
- Model: ETCR6000B
- CT Size (Jaw Opening): 16 x 18mm/0.6 x 0.7"
- Meter Size: 215 x 61 x 32mm/8.5 x 2.4 x 1.3"
- Function: Measurement of car dark current, leakage current and other AC/DC current, leakage current
- Power Supply: Zn-Mn dry battery 6F22 9V
- Test Mode: Clamp CT, Non-contact measurement
- Range: 0mA～60.0A AC/DC
- Resolution: 1mA AC/DC
- Accuracy: ±2%rdg±5dgt (23℃±5℃, below 75%RH)
- Display Mode: 4-digit LCD display
- LCD Size: 35 x 21.5mm/1.4 x 0.8"; display area: 32 x 15mm/1.3 x 0.6"
- Sampling Rate: about 2 times/s
- Frequency: AC 45Hz~400Hz
- Polar Indication: Automatic identification, display "-" symbol
- Wire Position: The tested wire in the center of the clamp jaw
- Range Shift: Automatically
- Line Voltage: Line measurement below DC 600V
- RS232 Interface: With RS232 interface, data can be uploaded to computer to save and print
- Communication Parameter: Baud rate: 9600, data bit 8, stop bit 1, check bit NONE
- Data Storage: 99units; FULL symbol displayed to indicate that storage is full
- Data Hold: Data hold function: DH symbol displayed
- Overflow display: Exceed measure range overflow function: OL A symbol displayed
- Automatic Shut Down: After power on for 5 minutes, the meter shuts down automatically without any operation to reduce energy consumption
- Working Current: 20mA max
- Working Temperature: -10℃ to 50℃, below 80%RH
- Limit Temperature Error: -10℃ to 0℃ and 40℃ to 50℃, the maximum increase in error is 2%rdg
- Storage Temperature: -10℃ to 60℃, below 70%RH
- Insulating Strength: AC 3700V/rms (between the core and outside shell)
- Suitable Safety Standard: IEC1010-1, IEC1010-2-032, pollution grade 2, CAT Ⅲ (600V)

Package Included:
- 1 x Set of Leakage Current Meter

Note:
- Battery is not included. 6F99 9V battery is recommended.