EWRF TS5823Pro 5.8G 40CH 600mW Wireless Video Transmitter + 708R AV Receiver (with AV Cables)
Features of EWRF TS5823Pro:
* 5.8G 40CH 600MW VTX transmitter with digital display
* The video transmitter module with 5V output
* With a button to switch frequency bands
* Can display frequency bands
* A heat sink ensures excellent heat dissipation performance
* Can be used with a 5V camera and a 12V power supply, or used with a 12V camera and a 12V power supply
Specifications of EWRF TS5823Pro:
* Model: EWRF TS5823Pro
* Operating frequency: 5.8G
* Operating channels: 40CH
* Transmitting power: 600mW
* Operating voltage: DC 7-24V
* Operating current (12V): 230mA (600mW)
* Antenna: SMA female connector
* Module net weight: 5g
* Volume: 30mm x 20mm x 8mm (excluding the size of the antenna interface)
Reference Distance for EWRF TS5823Pro:
* When your model aircraft is in an open space without interference, the communication distance is 1-2 kilometers. The communication distance is 100-300 meters, without interference in an open space on the ground/water surface.
* Attention: This is analog signal transmission, and the image transmission is full power. The communication distance is subject to the specific use environment and actual reception conditions. Because there are too many interference factors in 5.8G analog signal transmission, we do not make any guarantees on the communication distance here.
708R AV Receiver:
* With a digital display
* The receiver with a metal shell
* Optional AV cables with RCA connectors
Specifications of 708R AV Receiver:
* Model: EWRF 708R
* Working frequency: 5.8G
* Working channels: 48 channels
* Volume: 42.84*27*9mm
* Working voltage: DC 7-24V
* Working current: 100 mA (12V)
* Display/buttons: 2 buttons/1-digit digital tube
* Antenna interface: SMA male connector
* Wiring interface: 5pin (power supply, power supply ground, video, video ground and audio)
Package Included (with AV Cables):
* 1 x VTX Transmitter
* 1 x AV Receiver
* 2 x Antennas
* 2 x Bundle of Cables
* 1 x Bundle of AV Cables
Packaging Details:
* Weight: 0.45kg
Button Configuration of EWRF TS5823Pro:
After
powering on, the digital tube displays channel group, channel frequency
point and frequency in turn. At this time, long press the button and
you can adjust the parameters.
Step 1: Long
press the button. Short press the button to adjust the channel group
when the digital tube displays letters for the channel group (A, B, C, D
and E).
Step 2: Long press the button again.
Short press the button to adjust the channel frequency points when the
digital tube displays Arabic numeral channel frequency points (1, 2, 3,
4, 5, 6, 7 and 8).
Step 3: After long pressing
the button to save the setting parameters, the module will enter the
normal working mode (the digital tube will cyclically display the
channel group, channel frequency points and frequency).
Step 4 (Pit mode):
*
Pit mode: Quickly press the button twice, and the red dot in the lower
right corner of the digital tube will be lit. At this time, the VTX is
turned off.
* Normal mode: Quickly press the button twice
again, and the red dot in the lower right corner of the digital tube
will disappear. At this time, the VTX is turned on.
* Note: In Pit mode, the working distance of the module is only about 1-2 meters.
1W 48CH 5.8G TX RX FPV Video Transmitter Receiver (w/ EWRF 5.8G OTG Receiver for Android Cellphone)
$73.03
1W 48CH 5.8G TX RX FPV Video Transmitter Receiver (with 5.8G FPV Receiver for Cellphone & PC)
$71.32
1W 48CH 5.8G FPV Camera VTX Combo FPV Camera and VTX (with Lollipop Antenna & without Receiver)
$44.86
