| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $73.64 | $72.13 | $69.88 | $66.87 | Contact US |
Assembled RC Tank Chassis Tracked Chassis DIY Climbing Car 3D Printing Load 5KG With Motors 370
$49.34
Assembled RC Tank Chassis Tracked Chassis DIY Climbing Car 3D Printing Load 3KG With Motors 280
$47.37
Tracked Robot Tank Chassis Shock Absorption Suspension Assembled DIY Toy Car 3D Printing w/ Motors
$47.37
Finished 3D Printing Tracked Tank Chassis 6V 370 Reduction Motor Version Intelligent Tank Chassis Support DIY
Features:
- Voltage: The 370 reducer motor with a rated voltage of 6V is used, so it is best not to exceed 9V in actual use (7.4V around is the best voltage).
- Load capacity: about 5 kilograms (with great potential for modification)
- Adopting two 370 speed reduction motors, each of them separately controls the forward and backward movement of one side of the track, so at least four-channel remote control devices (not included) are required.
- It is equipped with multiple bearings to ensure smooth operation and independent shock absorption.
- The motor adopts JGA25-370 all metal gear reduction motor.
- Removable and durable wide plastic track made of engineering plastic.
Precaution:
- This car uses an all metal gear 370 reduction motor. As long as it meets the parameters shown in the figure, it can be installed. There are many types of deceleration motors, such as those with different voltages, low speed and high horsepower, high-speed, encoder, etc., which can be replaced according to needs. For detailed replacement methods, please consult the customer service.
- Spring: wire diameter 0.7mm, diameter 7mm, length 25mm. Simply changing the wire diameter can increase the load.
Motor parameters:
- Rated voltage: 6V
- Load current: about 0.5A
- Locked rotor current: 2A
Package Included:
- 1 x Tracked Tank Chassis
Note:
- It only includes a chassis, other accessories such as remote control and power adapter are not included. Please prepare them by yourself.
- Most of this model is printed and produced by an FDM type 3D printer, so the occurrence of layering, micro-cracks, deformation, and other situations in the model cannot be avoided.
- Suitable for people over 14 years old (non children’s toys).
- Do not leave it in an environment with a temperature above 50 degrees Celsius for a long time as it may cause softening and deformation.
