FT232RL USB To RS232/RS485/TTL Module Industrial Isolated Converter For Industrial Control Device

FT232RL USB To RS232/RS485/TTL Module Industrial Isolated Converter For Industrial Control Device

Overviews:
This is an industrial USB to RS232/485/TTL isolated converter with original FT232RL inside. It features embedded protection circuits such as power isolation, magnetically isolation, and TVS diode, etc. What's more, the USB TO RS232/485/TTL comes with an aluminum alloy enclosure, make it solid and durable to work.

The USB TO RS232/485/TTL is very easy to use, fully automatic transceiving without delay. Thanks to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipment and/or applications with high communication requirement.

Features:
- USB To RS232, USB To RS485, USB To TTL (UART) communications
- Adopt original FT232RL, fast communicating, stable and reliable, better compatibility
- Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
- Onboard unibody magnetically isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
- Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightning-proof & anti-electrostatic
- Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance
- Fully automatic transceiver circuit with no delay, ensures the USB port communicates with different interfaces fastly and stably, without interfering each other
- Onboard TTL serial 3.3V/5V voltage translator, config the TTL level via switch
- Aluminum alloy enclosure with sand blasting and anodic oxidation, CNC process opening, solid and durable
- 3pcs LEDs for indicating the power and transceiver status
- High quality USB-B and RS232 connectors, smoothly plug/pull

Specifications:
- Product type: industrial optically isolated converter
- Baud rate: 300-921600bps
- Host port: USB
- Device port: RS485/RS232/TTL
- USB port:
* Operating voltage: 5V
* Connector: USB-B
* Protection: 200mA self-recovery fuse, isolated output
* Transmission distance: about 5m
- RS485 port:
* Connector: screw terminal
* Pins: A+, B-, GND
* Direction control: hardware automatic control
* Protection: 600W lightning-proof and surge-suppress, 15KV ESD protection (reserved 120R balancing resistor solder pads)
* Transmission distance: about 1200m
* Transmission mode: point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more)
- RS232 port:
* Connector: DR9 male
* Protection: TVS diode, surge protection, ESD protection
* Transmission distance: about 15m
* Transmission mode: point-to-point
- TTL (UART) port:
* Operating voltage: 3.3V/5V
* Connector: screw terminal
* Pins: TXD, RXD, GND
* Protection: clamp protection diode, over-voltage/negative-voltage proof, shock resistance
* Transmission mode: point-to-point
- LED indicators:
* PWR: red power indicator, light up when there is USB connection and voltage is detected
* TXD: green TX indicator, light up when the USB port sends data
* RXD: blue RX indicator, light up when the device ports send data back
- Operating environment:
* Temperature: -15℃ to 70℃
* Humidity: 5%RH ~ 95%RH
- Operating system: for Windows 10 / 8.1 / 8 / 7 / XP

Package Included:
- 1 x USB To RS232/RS485/TTL Module
- 1 x USB Connection Cable

Development Resources:
Wiki : www.waveshare.com/wiki/USB_TO_RS232/485/TTL