• GEPRC MARK4-LR7 Analog ELRS2.4G 7-inch FPV Drone Kit RAD 5.8G 1.6W High Power VTX Quadcopter Drone
  • GEPRC MARK4-LR7 Analog ELRS2.4G 7-inch FPV Drone Kit RAD 5.8G 1.6W High Power VTX Quadcopter Drone
  • GEPRC MARK4-LR7 Analog ELRS2.4G 7-inch FPV Drone Kit RAD 5.8G 1.6W High Power VTX Quadcopter Drone
  • GEPRC MARK4-LR7 Analog ELRS2.4G 7-inch FPV Drone Kit RAD 5.8G 1.6W High Power VTX Quadcopter Drone
  • GEPRC MARK4-LR7 Analog ELRS2.4G 7-inch FPV Drone Kit RAD 5.8G 1.6W High Power VTX Quadcopter Drone

GEPRC MARK4-LR7 Analog ELRS2.4G 7-inch FPV Drone Kit RAD 5.8G 1.6W High Power VTX Quadcopter Drone

Availability: In stock, usually dispatched in 1 business day

  • Price:$297.43
  • Price in reward points: 2974 Reward Points: 30
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $291.48 $285.53 $276.61 $264.71 Contact US
Quantity:

GEPRC MARK4-LR7 Analog ELRS2.4G 7-inch FPV Drone Kit RAD 5.8G 1.6W High Power VTX Quadcopter Drone

Features:

- Classic and attractive appearance
- Adopting RAD 5.8G 1.6W high-power VTX to ensure stable and reliable signal
- With GEPRC E2806.5 1350KV motor, it is recommended to use 6S battery (not included) to ensure strong output
- Using F405 flight controller and BLheli_S 45A ESC with stable performance, the overall performance is stable and the hand feels comfortable
- Using Caddx H1 camera, good visual experience

Specification:
- Frame: GEP-MK4-7
- Wheelbase: 295mm
- Top plate: 3mm
- Bottom plate: 3mm
- Arm plate: 5mm
- Splint plate: 2mm
- FC: GEPRC F405 V2
- ESC: SPAN 45A BLHeli_S
- MCU: STM32F405RGT6
- Gyro: ICM-42688-P
- OSD: Betaflight OSD w/AT7456E chip
- VTX: GEPRC RAD 5.8G 1.6W
- Camera: Caddx H1
- Antenna: Momoda 5.8G RHCP SMA
- Motor: GEPRC E2806.5 1350KV
- Propeller: Gemfan 7037-3
- Weight: 455g
- Receiver: ELRS2.4G
- Recommended battery: Lipo 6S 2600mah-4200mah / Lion 6S 6000mah (not included)
- Flight time: 12-30 minutes

Package Included:
- 1 x MARK4-7 FPV Drone Kit
- 4 x Gemfan 7037-3 (pair)
- 2 x M20x250mm Battery Straps
- 2 x Battery Silicone Pads
- 1 x Set of screws
- 1 x L-shaped screwdriver 1.5mm
- 1 x L-shaped screwdriver 2mm
- 1 x M5 Wrench

Note:
- Battery is not included.


Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha