Godox CT-16 Camera Flash Trigger Set Camera Trigger 16 Channels For Canon Nikon Pentax Olympus

Godox CT-16 Camera Flash Trigger Set Camera Trigger 16 Channels For Canon Nikon Pentax Olympus

Description:
The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a transmitter and a receiver and works by means of the frequency modulation wireless remote control.

The transmitter adopts an advanced circuit and components, and can transmit the coded FM wireless signal. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption. Continuously trigger for thirty thousand times. The trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of cameras. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.

The receiver is safe, energy-saving, and convenient to use. The product adopts microcomputer for controlling the decoding, which has superior anti-interference capability. Sensitive reaction speed. The highest synchronous speed can reach 1/250sec.

All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have 16 isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance.

Features:
- Universal hot shoe interface
- 433MHz transmit frequency secures fast response and stable transmission
- 16 channels, transmitting distance up to 30m/98.4ft, no limits with directions or angles
- Maximum synchronous speed up to 1/250 second
- With studio flash interface, it can wirelessly trigger several kinds of studio flashes
- Speedy frequency regulation, convenient for photographers to shoot
- Energy-saving design for transmitter and receiver

Compatibility:
- For Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, and SB-24;
- For Canon 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX/EXII, 430EZ, 420EX, 420EZ, and 380EX;
- For Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, and AF-240 FT;
- For Olympus FL-50 and FL36;
- For Sigma EF-500 DG Super, EF-500 DG ST, and EF-430;
- For Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, and 333D;
- For Vivitar 285HV (PC sync for older Vivitar 285/283);
- Other flash models with a trigger voltage of 12V or lower;
- Work with flash units using universal hot shoe like for Nikon, for Sigma, for Olympus, for Pentax (except for SONY as they use a special hot shoe);
- It is not for Nissin flash.

Specifications:
- Model: CT-16
- Channel: 16 Channels
- Transmit frequency: 433MHz
- Outdoor operation distance: max. 30m/98.4ft (open area without obstacle)
- Indoor operation distance: 25m/82ft max
- Synchronous speed: 1/250sec max
- Synchronous jack: PHI 6.35mm/ PHI 3.5mm
- Transmitter dimensions: 60 x 42 x 30mm/2.4 x 1.7 x 1.2"
- Receiver dimensions: 90 x 50 x 32mm/3.5 x 2 x 1.3"
- Material: Metal + Plastic
- Color: Black

Package Included:
- 1 x Set of Flash Trigger

Note:
- This trigger does not support TTL function.
- Batteries are not included. The receiver is powered by 2pcs 1.5V AAA batteries, and the transmitter is powered by 12V 23A lithium battery.

How to Use:
Insert the transmitter's hot shoe socket into your camera's hot shoe jack, plug the flash onto the receiver, and switch ON the receiver. Make sure the channel selector of both transmitter and receiver at same channel. Press the Test button on the transmitter to test before shooting.

If your camera does not have hot shoe socket for connecting the transmitter you can connect the transmitter to the camera by the PC Sync Cord provided. (Only the old camera needed).

You can trigger both the flashgun and studio lights with this flash trigger. If you use the receiver on big studio strobe flashlight or AC slave flash, you can just connect the receiver to the studio strobe flashlight with 3.5mm or 6.35mm jack plug PC Sync cord (not included).