Godox Xpro-C TTL Wireless Flash Trigger Remote Flash Trigger 2.4G Wireless X System For Canon

Godox Xpro-C TTL Wireless Flash Trigger Remote Flash Trigger 2.4G Wireless X System For Canon

Description:
Xpro-C TTL wireless flash trigger can control on camera flashes, outdoor lights and studio flashes of Godox wireless X system. Using with X1R-C receiver, it can control original flash for Canon. Suitable for CANON EOS series cameras with hot shoes.

Features:
- Built-in Godox 2.4G wireless X system enables multiple usage methods. Wirelessly trigger the Godox on camera flash, outdoor flash, and studio flash. The original flash is triggered wirelessly and synchronously. Wirelessly trigger the camera shutter. Use 2.5mm sync interface to trigger non-Godox X system flash
- More professional, rich in functions, support E-TTL II automatic flash
- 16 groups, 32 channels remote control and trigger, new 01-99 wireless ID settings. The ID and channel of the master control unit and the slave unit need to be consistent to trigger, effectively avoiding signal interference.
- Support TTL automatic flash, 1/8000 second high-speed synchronization, stroboscopic flash, manual flash, exposure compensation, TCM conversion function, zoom function, single shooting & group shooting settings, group modeling light control, group zoom, all groups as a whole to adjust power and other functions
- TCM conversion function. Convert the flash value of TTL mode to the power value of M mode
- The zoom function enables switching between multiple groups and single groups
- Outstanding design and simple operation. Light and portable
- Large LCD screen displays clearly, with 5 group buttons and 4 function buttons for faster operation
- Support Type-C USB firmware upgrade, 2.5mm synchronous interface wireless trigger
- Weighs only 80g/0.2 lb. Compact and portable

Compatibility:
- Suitable for Canon EOS series cameras: 1Dx Mark Ⅱ, 1Dx, 5Ds/5Dsr, 5DIV, 5D Mark III, 5D Mark II, 5D, 7D Mark II, 7D, 6D, 80D, 70D, 60D, 50D, 40D, 30D, 750D/760D, 700D, 650D, 600D, 550D, 500D, 450D, 400D Digital, 350D DIGITAL, 100D, 1200D, 1000D, 1100D, M5 and M3
- For flash: AD600 series/AD360Il series/AD200/V860Il series/V850II/TT685 series/TT600/TT350C/Quicker II series QTII/SK II series/DP II series/GSII

Product Parameters:
- Model: Xpro-C
- Compatible cameras: support for Canon EOS cameras (E-TTL II automatic flash). Support all cameras with PC output ports

Exposure Control:
- TTL automatic flash: E-TTL Ⅱ
- Manual flash: yes
- Stroboscopic flash: yes

Functions:
- High-speed synchronization: Yes
- Rear curtain synchronization: Yes
- Exposure compensation: Yes. ±3 stops in 1/3 stop increments
- Exposure lock: Yes
- Auxiliary focus: Yes
- Modeling flash: the flashing light can be controlled by the trigger
- Buzzer: the flashing buzzer can be controlled by the trigger
- Wireless shutter: The receiver can control the camera's shooting through the 2.5mm synchronization interface
- ZOOM setting: you can adjust the focus value of the flashing light through the transmitter
- TCM function: Convert TTL shooting value to M output value
- Firmware update: firmware update through the Type-C USB port on the fuselage
- Memory function: the parameters after setting for 2 seconds will be automatically memorized, and the parameters will be automatically restored after restarting

Wireless Flash:
- Transmission range (approximately): 0-100M/0-328.1FT
- Built-in wireless: 2.4G frequency
- Modulation method: MSK
- Channels: 32
- Wireless ID: 01-99
- Group: 16 groups

Others:
- Display: widescreen LCD display, backlight on or off
- Size of flash trigger: 90 x 58 x 50mm/3.5 x 2.3 x 2"
- Net weight: 80g/0.2 lb

Package Included:
- 1 x Set of Wireless Flash Trigger

Note:
- Batteries are not included. 2pcs AA batteries are recommended.