GS-100 Mini Handheld Spectrum Analyzer 35MHz-4400MHz 4.3-Inch TFT Color LCD 480*800 0.5PPM TCXO

GS-100 Mini Handheld Spectrum Analyzer 35MHz-4400MHz 4.3-Inch TFT Color LCD 480*800 0.5PPM TCXO

Advantages:
1. Scientific operation settings, input RF design on the left for easy connection to feeder.
2. Professional N-type to SMA adapter, N/SMA-KJ connector, compatible with all professional equipment.
3. Improved USB power supply interface, a new type-c interface with higher performance and stronger matching.
4. One-time forming aluminum professional shell with beautiful and good performance.

Features:
- It adopts stm32f407 MCU (main frequency 168M) and 4.3-inch TFT (480 * 800) color LCD screen.
- All aluminum alloy shell and rotary encoder control.
- 0.5ppm TCXO: To ensure the frequency accuracy of high frequency measurement using 0.5ppm TCXO network analyzer.
- Type-c USB power supply, full English display.
- The spectrum display range is 35M-4400MHz.
- Use range: for walkie-talkie, toy remote control, 2.4Gwifi.

Specifications:
- Main material: aluminum alloy + metal
- Screen size: 4.3 inches
- Spectrum display range: 35M-4400MHz
- Input impedance: 50-ohm
- RBW: 10KHz, 50KHz, 100KHz, 200KHz, 500KHz, a total of 5 gears can be adjusted
- Screen scan points: 700 points
- Scanning range: 7M (10KHz), 35M (50KHz), 70M (100KHz), 140M (200KHz), 350M (500KHz)
- DBm range: -80dB 110dB (supports manual adjustment of the calibration range). There is no amplifier circuit inside the machine. If you need to measure small signals, you need an external amplifier.
- Maximum access signal: 10dB
- Working mode: superheterodyne sweep spectrum analyzer, single sweep time is 800ms
- Product weight: 270g/5.2oz

Attention:
1. This product uses local oscillator signal and external test signal to obtain the difference frequency signal, and calculates the amplitude of the external test signal through the detector. High-precision VCO sources can measure heterodyne signal frequencies very accurately. Due to the very large scanning range (35M-4400M), cost and other factors, there is no special detection circuit for external measurement signals, so the measurement amplitude may have errors. Therefore, the product increases the magnification and displacement parameters, and users can adjust the displayed waveform by themselves. The amplitude display is adjusted and calibrated.
2. Internal integrated lithium battery charging circuit. This product uses un38.3 certified batteries. 3.7V. 4000mAh, battery model 606090. By default, USB is used for charging.

Package Included:
- 1 x Spectrum Analyzer
- 1 x Type-C USB Cable 1M
- 1 x SMA N/SMA-KJ (N Type To SMA Adapter)