Handle Stabilizer 3-Axis Brushless Gimbal DS1 + Two Handheld + Quick-Release for Camera

Handle Stabilizer 3-Axis Brushless Gimbal DS1 + Two Handheld + Quick-Release for Camera

Note: The battery cannot be delivered to some countries because of the policy. If you want it ,pls choose express delivery, or contact us directly.

Beholder DS1:
Description:
Beholder DS1 can load 2kg, Support Canon 6d / 5d / 7d, support large SLR, like A7R2,A7S+24-70/12-35,RX10DII, GH4+12-35, GH3+14-140 ect,

It can be more widely used in theater quality video, collect micro-film, feature films, documentaries and other types of video works.

Beholder DS1, is the first dual-level sensors 5D single handheld three-axis gyro stabilizer. Whether fast with the film, a low angle shooting, you can make your shot using a 32 .DS1 arbitrary system, faster response, with dual sensors, stability and accuracy greatly improved, and supports any angle boot, support poured directly without switching shooting modes, supports 3 axis 360 degree no dead augmentation, support GH series scroll, support for external remote control (wired or wireless remote control), allowing you to connect extension rods can become mobile after the rocker arm to achieve lens, slide the lens and time-lapse photography. Beholder DS1 inherited MS1 five-way control switch, unique five-way switch can be achieved lens up and down control, and a mode switching function.

Function:
- Without switching modes, direct inversion
- The 32-bit processor and dual-sensor, any angle starts up
- The system doesnt get messed with external interference
- Support hand-tighten the screw to change the three-axis length,for changing the the center of gravity
 
Beholder DS1 Camera Stabilizer
Quick to setup, easy to use, and extremely affordable are the key features of the Beholder MS1 Camera Stabilizer, building upon these features is the TRD Beholder DS1 3-Axis Camera Stabilizer. The DS1 adds improved payload of 3.8 pounds/1700 grams, room for a camera's flip out LCD, micro USB port for wired remote control, and Bluetooth. TRD's years of experience in developing gimbals for handheld and aerial stabilizers are realized in the DS1's design. The stabilizer has a 32-bit system with dual IMU sensors. The DS1 arrives pre-programed and ready to use out of the box. The stabilizer is lightweight at 2.2 pounds with batteries, and able to operate for 3 hours. Just like the MS1 the DS1 is compact enough to share a backpack along with other gear such as a camera, lenses, and other accessories. For a small film crew trying to squeeze the most out of a day or for a solo filmmaker limited to what they can carry, the DS1 is the perfect choice. The stabilizer offers the camera movement of a shoulder rig, a slider, a jib, and a stabilizer in a convenient package. The compact size of the stabilizer makes it possible to shoot in locations that normally don't allow commercial/professional filming. Camera operators of all levels will find the Beholder DS1 Camera gimbal to be a rewarding and improved experience. Just like the MS1 the DS1 stabilizer is designed to function simply, making learning to operate an intuitive experience. Supported cameras are the Sony A7 Series, GH4, BMPCC, 5D, 7D, see supported camera section for more supported models. The stabilizer has a ¼ inch mount at the bottom of the handle, great for mounting the DS1 to a monopod for a stunning jib shot. Another feature of the Beholder DS1 Stabilizer is the built in 5 way joystick offering complete control over pan/tilt and mode selection. Included with the stabilizer is a USB charger and travel case. The Beholder DS1 Camera Stabilizer from OwlDolly gives you added production value without the headache.

Supported Cameras:
- Supported maximum camera package 3.8 pounds, 1700 grams.
- Sony A7 series.
- GH4, GH7, series.
- Canon 5D, 7D.
- NEX series.
- DMC series.  
- Canon 5D, 7D.
- Nikon D810, D800.                                                                                                                    

Features:
- Pre-calibrated.
- Compact Design, fits in a backpack.
- 3 hour battery life.
- Travel friendly.
- 5 way joystick.
- Fun and easy to use.
- Tool free operation.

Specs:
- 3-Axis stabilizer/ gimbal
- Battery 3.7 volts 18650, 2600mAh.
- Tripod mount, 1/4th(20).
- USB charging port.
- Model DS1.
- Micro USB for wired remote control.
- 32 Bit Board Simple BGC.
- Dual IMU senors.
- Bluetooth. (Android APP).
- 2.2 pounds weight with battery.

Product instruction link : Click here

Two Handheld Description
Description:
- Beholder D2 Dual handle grip use 3K carbon-fibre tube,and high precision CNC aluminium alloy;embedded structure in connected position,lightweight and durable
 
- Beholder D2 designed with quick release which can compatible with Manfrotto series quick release plate.Achieve operate from single handle to double handle quickly.

- There is a reserve screw hole for install controlled by wire on the hand grip,and equipped with matched install screw.You could install the controlled by wired on either side of the hand grip according to your needs,you could adjust the shooting angle of the ball head and switch modes quickly when operating by Dual hands
 
- Support DS1 and MS1

Specification:
- Height:163mm
- Length:335mm
- Width:90mm
- Weight:550g(including quick release)

Package List:
- 1x Beholder DS1 Camera Stabilizer
- 1x Camera quick release plate
- 1x Adapter Plate
- 1x USB LED light
- 1x Battery holder
- 1x Travel case
- 1x Beholder D2 two handle grip
- 1x Quick-release plate