Hantek CC650 CC-650 20KHz 650A Oscilloscope Multimeter AC/DC Current Clamp with BNC Connector

Hantek CC650 CC-650 20KHz 650A Oscilloscope Multimeter AC/DC Current Clamp with BNC Connector

Description:
It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms. When measuring AC/DC Current with the Current Clamp, a multimeter or scope can directly measure the current up to 650A, with a frequency uo to 400Hz. In this method, there is no need to break a circuit or to affect the isolation to measure the current.

Features:
- AC/DC frequency range: up to 400Hz.
- Effective measurement range: 20mA to 650A DC.
- Allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.
- Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage.
- If connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms.

Application:
Power circuit measurement and malfunction analysis;
Motor drive of frequency converter (or other electronics) measurement;
Power electronics equipment measurement.

Specifications:
- Efficient Measure Range:
- 1mV/100mA: 100mA to 20A, Multimeter Range is set to DC or rms AC 200mV
- 1mV/1A: 1A to 200A, Multimeter Range is set to DC or rms AC 200mV; 200A to 650A, DC or rms AC 2V
- DC Current Accuracy: 0 to 650A, +/- (3% reading + 2A )
- AC Current Accuracy: 50Hz arrive at 400Hz
- collected Conductor Size: Max. 30mm
- Low Battery Indicator: Red LED Lighting
- Operating Temperature: 0°C to 50°C 70% RH
- Storage Temperature: -20°C to +70°C, 80% RH
- Battery Type: 1 * 9V 6F22 Battery (NOT Included)
- Output: BNC Plug
- Dimensions: 175 * 70 * 33mm / 6.9 * 2.75 * 1.3in
- Weight: 235g / 8.31oz

Package List:
1 * Current Clamp with BNC Plug
1 * User Manual